Jump to content
SAU Community

Recommended Posts

Hi guys,

got the car wheel aligned today here in brisbane from bridgestone select, done an awsome job. We settled for Rear left +1.14degree Rear right +1.29 and both toeing in 2.7mm which under full squat the car will pull the rear wheels back to 0 degree and 0 toe, so should hook up good.

Front left -1.83degree and front right -1.46degree, front toeing in 0.8mm and got the caster sorted aswell, because the left front was hanging back the right front was pushed foward, so thats all good now too.

I am a little worried about the amount of toe on the rear as it does seem like alot.

After looking at that video, it doesn't look like your getting enough rear droop to zero out your ass end after the initial launch... Spring rates, compression and weight transfer looks pretty good though.

I'd hate to see the car start getting sketchy in the top end for the sake of marginally more traction (that you may not need).

Must be a blast to drive!

Justin.

The Japs were going faster in the late 90's with H-patterns?

They probably were...it's been a while :)

Definitely fastest/quickest H-pattern street GTR either way.

Looks like there is plenty left in, too.

Hi Guys, Just driving home back to Mackay, I will put the link on the 8.97sec pass up. Also Theo Willot Still holds the World record for fastest H pattern GTR I missed out by .02 of a second, and on Sunday I was gona to smash that time with an ET of 8.8. But third gear smashed into a million bits. I was 3MPH faster by half track than my 8.97 and thats also lifting of cause 3rd blew up. We are under the impression that the selector fork has bent therofore only half engaging 3rd and stripping the teeth off the cog.

Im laying down the challange that this car will run a Mid 8.5sec pass or lower with this H pattern box, as I am only running 150MPH to get 8.97secs and theo done 8.95 at 162MPH, I am only currently running 900-950HP with alot of go juice up my sleeve. Haha.

I will upload the other video my GF filmed later tonight when we get home,

cheers Matt

They probably were...it's been a while :)

Definitely fastest/quickest H-pattern street GTR either way.

Looks like there is plenty left in, too.

There is no evidence of a Japanese or American or euro or pommy GTR even running the 8s with a H pattern box, me and theo are the only ones to do it, Yes there are plenty of GTR in the 8s and 7s but they all run Sequential boxes or Airshifted liberties or Lenco gearboxes, which are an easy 0.3 of a sec quicker. Thats why Theos time is a World record that himself or me could ever find recorded.

Yes, how could I forget Theo's time....I don't think it was registered though :D

Either way, fantastic result and hope to see it get close to [RH9GTR]'s 8.47 auto time

btw, what does the car weigh in race trim?

There is no evidence of a Japanese or American or euro or pommy GTR even running the 8s with a H pattern box, me and theo are the only ones to do it, Yes there are plenty of GTR in the 8s and 7s but they all run Sequential boxes or Airshifted liberties or Lenco gearboxes, which are an easy 0.3 of a sec quicker. Thats why Theos time is a World record that himself or me could ever find recorded.

Check out these videos... There are several running 8's with H-patterns

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...