Jump to content
SAU Community

Recommended Posts

My mate is 6'7", and doesn't fit in anything. However he really wants an import.

He's considering an Evo, although he'd much rather a RWD car. Soarers too he'd probably fit but 95% of them are automatics.

What other options are there? Do 300xz's have roomy driver seats? Aristos? R34s seem a bit taller, would he fit in that?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/280788-imports-for-tall-people/
Share on other sites

Supra, 6 spd, 2JZGTE, super strong drivetrain/motor etc with none of the oil problems and bullsh!t skylines have. Dont rule out the auto's though, they're deceptivly quick - and for the same price as a multiplate manual clutch you can build the box to hold 1000hp with no probs.

There's heaps of headroom in my one, (jza80 tt) if you need even more though - go buy some BRIDE seats :)

Bolt on turbo, ecu, injectors, manifold, dump pipe, zorst, fmic, fuel pump, clutch - maybe coilpacks etc and there's 450rwkw :laugh:

Thats why i bought one, but then you already knew that cause you've got one :)

/End thread

My mate is 6'7", and doesn't fit in anything. However he really wants an import.

He's considering an Evo, although he'd much rather a RWD car. Soarers too he'd probably fit but 95% of them are automatics.

What other options are there? Do 300xz's have roomy driver seats? Aristos? R34s seem a bit taller, would he fit in that?

Cheers.

I'm 6'2", and i only just fit in my r33gtst

There's heaps of headroom in my one, (jza80 tt) if you need even more though - go buy some BRIDE seats :laugh:

yeah but you're like 3 foot something.

buy a chaser, much more foot and headroom, same power, more comfort.

My mate is 6'7", and doesn't fit in anything. However he really wants an import.

He's considering an Evo, although he'd much rather a RWD car. Soarers too he'd probably fit but 95% of them are automatics.

What other options are there? Do 300xz's have roomy driver seats? Aristos? R34s seem a bit taller, would he fit in that?

Cheers.

Aristos have a bit of room however 100% of them are automatics.

a 6'7 guy would look funny as f**k gettin out of a supe, or most of the lower sitting imports. I'm 6'4 and jus put up with it, aftermarket seats can help. would be a pain though poor bastard...

Edited by Flipmo
Supra, 6 spd, 2JZGTE, super strong drivetrain/motor etc with none of the oil problems and bullsh!t skylines have. Dont rule out the auto's though, they're deceptivly quick - and for the same price as a multiplate manual clutch you can build the box to hold 1000hp with no probs.

There's heaps of headroom in my one, (jza80 tt) if you need even more though - go buy some BRIDE seats :)

Bolt on turbo, ecu, injectors, manifold, dump pipe, zorst, fmic, fuel pump, clutch - maybe coilpacks etc and there's 450rwkw :thumbsup:

Thats why i bought one, but then you already knew that cause you've got one :thanks:

/End thread

lol. As much as I love the Supra he simply did not fit in mine. I'm 6' exactly and I have quite a bit of head room so I thought he'd be fine, but no such luck. 6'7" really is just huge.

Im 6'6" and fit in my r33... just.

Quick steering is a bit of a problem cause of the knees but if you adjust the seat right (drop the bottom part as low as it goes, tighten up side supports and lean back a bit) you wont have too much drama.

I would recommend an aftermarket seat with lower modified rails so the seat slides back a bit more, oh and a dished steering wheel to clear them knees, but only if hes after an older one with no airbag coz otherwise youre stuck with the stock item.

^^^ Bahahaha....

Im 6'6 and fit into my 33.... barely though.... ill be lookin into modify seat rails.... one day ...lol...

it makes drifting with handbrake almost impossible, ya knee is always in the way ... fustrating...

but cannot think of anything else that would suit his size thats already suggested... whatev he decides just modify the rails... not sure if its that legal though...

I beat you all

:devil:

6'8

202cm when standing straight

201cm now with no kneecaps after 12 surgeries

thats like 204cm 6'9 with shoes on

so, the car of choice is obvious - Nissan C34 Stagea

series 1 or 2, sunroof is fine

automatic Awd or manual Rwd

If your mate wants a manual Rwd Stagea he'll need a S2 as the seat is better, S1 seats sit you up a little higher

Ive had my Stagea for over 4yrs now, and have just recently changed the drivers seat out for a D1 Saas seat - sits lower and a little back

Nice leg room, admittedly I did lengthen the seat rail as one of the 1st mods, so yeah Id suggest buying a $200 'bride' seat rail from justjap and use that with stock/race seat

Stagea with 250rwkw is simply WIN

DSC00307.jpg

lol. As much as I love the Supra he simply did not fit in mine. I'm 6' exactly and I have quite a bit of head room so I thought he'd be fine, but no such luck. 6'7" really is just huge.

love the quote :devil:

door size ey'

a 6'7 guy would look funny as f**k gettin out of a supe, or most of the lower sitting imports. I'm 6'4 and jus put up with it, aftermarket seats can help. would be a pain though poor bastard...
lol. As much as I love the Supra he simply did not fit in mine. I'm 6' exactly and I have quite a bit of head room so I thought he'd be fine, but no such luck. 6'7" really is just huge.

QFT, I'm 6' 3" and standing next to a supra the other day I realised it's just over half my height

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...