Jump to content
SAU Community

Intake Plenum

mattye

By mattye,
in Four Door Family & Wagoneers

 Share

Recommended Posts

mattye Rising Star

mattye

Posted
Posted

Has anyone installed an aftermarket Intake Plenum?

Like this one. http://justjap.com/store/product.php?produ...at=0&page=4

I'm cosidering one cause this would get rid of the intercooler pipping problem of having to have it come back to the same side either under the cooler or above the radiator. Beacause the intake would be on the other side of the engine.

Not necessarily this one but one simmilar.

Link to comment
https://www.sau.com.au/forums/topic/281154-intake-plenum/
Share on other sites
pyro-ns Community Regular

pyro-ns

Posted
Posted

looks like a greddy copy. i'd find other people who have used this particular manifold before you guy one. as long as the internal dynamics are the same, you can't go wrong for that much. greddy items are around a grand from memory.

Link to comment
https://www.sau.com.au/forums/topic/281154-intake-plenum/#findComment-4740939
Share on other sites
StageaTypeS Collaborator

StageaTypeS

Posted
Posted

I would be really interested to know if those plenums fit onto a RB25det NEO motor I have heard the way the plenums bolt up on a Neo are slightly different to a normal RB25det. Apparently they can be modded to suit but I have no real knowledge of exactly what is required. FYI greddy don't have a listing for a plenum for the RB25det NEO only the RB25det.

I have read on the Nissan Silvia forums that some of the ebay plenums are quite good as a few people are using them there, Trent at Status has tuned a few cars with these plenums.

The ones in particular are the ones from Thailand that go for about $699 and are apparently JUN copies. They do look the part but I don't know anyone with one.

Might be another idea anyhows....

Link to comment
https://www.sau.com.au/forums/topic/281154-intake-plenum/#findComment-4742096
Share on other sites
Mr GTS4 Mentor

Mr GTS4

Posted
Posted

hay just thought i'd add my 2cents..

i would probably buy the jun copy over the overs as the quailty is alot better ( smoother and less work )

try to find that thread on the DIY install for the greddy copy one i think there was afew posts about installing it onto a neo head.

the attached pics are what i will be installing onto my Neo in my stag. its a rb25 manifold that has been cut and then had a adapter welded to that so you can bolt on the gtr intake setup.. i will be running top feed gtr injectors, so i had to get a new rail and the gtr resister pack as well.

i haven't installed it yet but i've almost got everthing together to do it..

Cheers

post-4857-1249017474_thumb.jpg

post-4857-1249017508_thumb.jpg

post-4857-1249017517_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/281154-intake-plenum/#findComment-4742538
Share on other sites
pyro-ns Community Regular

pyro-ns

Posted
Posted
hay just thought i'd add my 2cents..

i would probably buy the jun copy over the overs as the quailty is alot better ( smoother and less work )

try to find that thread on the DIY install for the greddy copy one i think there was afew posts about installing it onto a neo head.

the attached pics are what i will be installing onto my Neo in my stag. its a rb25 manifold that has been cut and then had a adapter welded to that so you can bolt on the gtr intake setup.. i will be running top feed gtr injectors, so i had to get a new rail and the gtr resister pack as well.

i haven't installed it yet but i've almost got everthing together to do it..

Cheers

VERY interested to see how this goes. best of luck!!!

how nice would it be to get AN fittings in black and braided lines in black also? would retain much of the sleeperisms :)

Link to comment
https://www.sau.com.au/forums/topic/281154-intake-plenum/#findComment-4743167
Share on other sites
  • 2 months later...
Mr GTS4 Mentor

Mr GTS4

Posted
Posted

just an update if you guys wanted to know.. i finally found a rail that mounts to the standard r33 mounts but uses top feed injectors. did a trial fit with standard GTR injectors and it all sweet. the only real expensive part was the rubber insulators for the top of the injectors from nissan, with 6 of them and 6 o-rings and $150 later.

found out that the Neo tps is different design to the R33 one, there was one guy on there that had made up an adpater plate that goes on to the end and the neo one attaches too (pics).

also does anyone know if you can adapter a R33 tps to a R34 ecu??

Curt

post-4857-1254834788_thumb.jpg

post-4857-1254834953_thumb.jpg

post-4857-1254834963_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/281154-intake-plenum/#findComment-4865571
Share on other sites
  • 2 months later...
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Rusty roof repair

      By Duncan · Posted

      Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • Duncan
      first time swapping rb25det into r34

      By Duncan · Posted

      This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
    • dingleberry
      first time swapping rb25det into r34

      By dingleberry · Posted

      hows it fellas, my first post here which seems crazy cos half the forums i read are like the same age as me haha. to make a long story short ive got an r34 sedan (rb25de neo auto) which im swapping to a s0/s1? rb25det, r33 big box and nismo gt pro lsd. i have the motor and gearbox all bolted up outside the car, old motor and trans out. i bought the motor with stock ecu and loom, do i switch over to that? or will it be easier to get a r34 manual ecu and keep the loom if thats even possible.  also engine mounts look different, anything else thats different or incompatible? cheers, hope this all makes sense Paddy
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
    • Keeper
      SAUNSW - World Time Attack Challenge - 5 & 6 September

      By Keeper · Posted

      Plan on the day will be to park trackside. Depending on space availability we will try put a small shade tent and a few of the cars on top of the hill inside turn 3, this is an easy to get to parking area with views of Turn 2, Turn 3, Turn 4 and Turn 5 and limited other pieces of the view around the track. IMPORTANT NOTE! One consideration from previous years is from memory the trackside parking sells out before the admission tickets, for that reason I encourage anyone planning on coming to buy tickets for parking now via the official website; https://www.worldtimeattack.com/ The type of parking you are looking for is 2 Day Park & View (Access Around Venue) Vehicle Pass Only Please note this does not include admission to the event itself, remember to grab that also, and kids under 12 get in for free!
×
×
  • Create New...