Jump to content
SAU Community

Thinking Of Buying A Skyline

sweefu
 Share

Recommended Posts

sweefu Mentor

sweefu

Posted
Posted

Hey guys,

just signed up and was hoping someone could help me.

At the moment i have a 5 speed series 2 vs commodore, putting out around 165fwkw and maybe 120ish rwkw

i am thinking of selling it and going for an N/A r33 skyline. I was hoping someone could tell me about the

suspension setups, diff, gearbox clutch, engine, fuel efficiency and just anything about them, how they respond to different modifications

how people like them

and if anyone has gone from a commodore to a skyline, has any opinions or anything

Any help would be great,

Thanks,

Anthony.

Link to comment
https://www.sau.com.au/forums/topic/281394-thinking-of-buying-a-skyline/
Share on other sites
KezR33 Veteran

KezR33

Posted
Posted

Meh, at the end of they day they're both slow cars. However the Commodore is a heavy sedan designed to haul heavy loads. It's not a race car. Neither is an NA Skyline, but at least it has the potential to handle like one.

Just think what you want the car for.

Looks, to show off? Skyline (well, purely opinion, but Commodores are EVERYWHERE, and they don't impress the ignorant).

Practicality? Commodore.

Track work? Skyline.

Straight line speed? Supra :) . Kidding. Although they are quick for an NA!

sweefu Mentor

sweefu

Posted
  • Author
Posted
Meh, at the end of they day they're both slow cars. However the Commodore is a heavy sedan designed to haul heavy loads. It's not a race car. Neither is an NA Skyline, but at least it has the potential to handle like one.

Just think what you want the car for.

Looks, to show off? Skyline (well, purely opinion, but Commodores are EVERYWHERE, and they don't impress the ignorant).

Practicality? Commodore.

Track work? Skyline.

Straight line speed? Supra :) . Kidding. Although they are quick for an NA!

Thanks for the advice mate, and taking the time to reply.

My commodore only weighs 1300kg ;) . not too bad really, i've put alot (probably too much) money into making it handle well and it does compared to a stock commodore, but prob still handles as well as a stock r33.

i want it to perform and be decent on petrol if i can. dont give a crap what it looks like haha.

Cheers again champ.

HEKT1K Grand Master

HEKT1K

Posted
Posted

i dunno if an NA skyline will really be a HUGE step ahead of the commodore as an overall package.

a GTS-t would be a much better option i think.

are you on Ps? if so, i would wait until you get your full licence, then get into a nice clean GTS-t :angry:

although i have not driven an NA skyline, i did own a VP commodore, slammed, rims, with big audio etc. very happy with my upgrade :(

good luck

Birds Grand Master

Birds

Posted
Posted
I used to have a VX commodore S pack. dropped on VY SS rims, looked tops but handled like a boat.

Coming to a skyline, its not fair to compare.

Get one - it will speak for itself.

Course it's unfair! You did go from a Commodore to a GTR! :angry:

KR4-GTR Mentor

KR4-GTR

Posted
Posted (edited)

Haha - yeah good point! :angry:

My girlfriend had a 25t which had the turbo removed for a few years, it still went alright - better than my commonwhore did!

Alot more responsive and the whole thing feels alot lighter.

Great cars to drive :(

Edited by KR4-GTR
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

They are both N/A POS's... Realistically i wouldn't be overtly surprised if the commodore was much slower, overall IMO they should be basically the same in terms of performance.

One does not really handle that much better than the other to add to the fact.

IMO if you have already dumped some cash into your VS, just keep it.

A N/A RB25 is a lazy piece of shit with nothing down low, you will really miss that going from a 3.8ltr that is geared to haul weight and low RPM vs a motor that really does not like added weight (put 3 people in the car and you'll see what i mean), and it wont go anywhere unless you wring it's neck.

Ye im a hater i guess, i just dont see it as an upgrade at all over what you have. N/A performance is dead money.

Any mod you do cost vs gain is bugger all. Save and wait for a turbo model

SKYL1N Mentor

SKYL1N

Posted
Posted

ive driven heaps of commodores.

and ive got my NA

performance.. there is a difference in favour of my skyline, not much tho

when it comes to bends tho, theres no competition

the skyline handles very very well, and also it alot more fun to drive

friends who own the commodores i have driven that have driven my car say the same thing.

GTR-32U Mentor

GTR-32U

Posted
Posted

Yeah bearing in mind you have already spent a pack on the Commodore I would also say keep the Commodore. But do a really good value mod that I always did. Drop your Diff ratio to 3.7 or 3.45 at the least. This will really make the car pull SO much harder at all speeds. Bore a large hole through the floor of the airbox and run a ram cold air intake from the front as well..... Both of these mods should make you enjoy the machine a bit more

Johnny Veteran

Johnny

Posted
Posted

Hey mate, i did have an NA r33 as my first car and its true, they are terrible for power; not that power is everything but they are heavy and dont put down enough torque at low rpm so you need to drive everywhere with your cannon blazing.

as the go with NA mods, i did the breathing mods and a dyno/chip tune to grab 78awkw - a 2kw gain n bout 10kw in the low to mid range.

Handling you will love though, they are great with a basic shock/spring/swaw/strut upgrade.

IOWNU Grand Master

IOWNU

Posted
Posted

First car I had was a N/A R33 on my L's.

Piece of crap. Slow as hell and doesn't handle that great, i'd get depressed everytime I heard a GTS-T spooling.

If you want a Skyline, go a turbo model, don't bother with a N/A.

sweefu Mentor

sweefu

Posted
  • Author
Posted

Thanks for the help here guys. Seems i might stay with the VS for a bit longer. I am on my p's but i'm in canberra so i can drive whatever i like, if i wanted a turbo i could afford buying it, but i couldnt afford the petrol haha.

I've done a CAI and exhaust on my vs, as well as kyb/pedders suspension with whiteline polyurethane bushes throughout, its only on 175000k's so i guess i'll keep her the bit longer. Oh, its got a 3.45 open centre diff. in it at the moment.

Thanks again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...