Jump to content
SAU Community

Recommended Posts

Hello,

I have just been told that I have to take out my Microtech ecu (cops) and was looking at the nistune option. What my question is are they a good option to go for knowing that i will be checked for to see if my ecu looks stock. Is there many of them being used. my car is a r33 s2 (auto)

Mods so far are FMIC, full exhaust, splitfire coils, did have a Eboost2 boost controller but also had to be removed & a Hypergear hyflowed turbo. I am looking to get back to the power i had before when i had all my parts in. Any help with this will be very helpful :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/281946-nistune/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Put the standard ECU in, get it checked over (defect cleared?) then put the microtech back in?

Do cars in victoria regularly get checked for aftermarket management? Or is it really obvious (hand controller visible?)

Was going to say with the mods you have the nistune would probably be a better option than the microtech. Sell the microtech should cover the costs of getting the nistune installed and tuned.

Link to comment
https://www.sau.com.au/forums/topic/281946-nistune/#findComment-4749288
Share on other sites

Put the standard ECU in, get it checked over (defect cleared?) then put the microtech back in?

Do cars in victoria regularly get checked for aftermarket management? Or is it really obvious (hand controller visible?)

Was going to say with the mods you have the nistune would probably be a better option than the microtech. Sell the microtech should cover the costs of getting the nistune installed and tuned.

Had my gtr for 7 or 8 year and have never been checked :happy:

Link to comment
https://www.sau.com.au/forums/topic/281946-nistune/#findComment-4749441
Share on other sites

It isnt? I thought it still was in Queensland? lol well thats a load off my mind

They are aligning with the national standard in 18 months but if you get a blue plate now and it has written there that you have an aftermarket ECU, in 18 months when they introduce the standard, you will be ok to keep it. Anyone after the standard is introduced will not be able to have an aftermarket ECU fitted.

There is currently no emmissions testing in QLD so for the time being we are safe. I got this info from DOT and the guy who writes my blue plates.

Link to comment
https://www.sau.com.au/forums/topic/281946-nistune/#findComment-4749582
Share on other sites

Its funny how cops can find and EPA you on a high flowed turbo, which they are just identical looks to any other stock turbos. I also had a customer who got defected in Vic over a high flowed GTiR turbo that we worked on. I really believe they have X-ray eyes or some thing to looking through metal housings for bigger wheels.

Nistune is good and cheap. You can get away from most of cops with it. But I don't think Matt have made one for R33 yet. Most people I know is running off a R32 ECU with modified loom.

Link to comment
https://www.sau.com.au/forums/topic/281946-nistune/#findComment-4751777
Share on other sites

Most people I know is running off a R32 ECU with modified loom.

Nothing available for R33 yet, as far as I was aware it is plug and play with a 20 ecu, its just that you loose the variable valve timing, but I think its only series 1 that might be plug and play as series 2 has the ignitor in the ecu where the Rb20 does not.

Link to comment
https://www.sau.com.au/forums/topic/281946-nistune/#findComment-4752189
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...