Jump to content
SAU Community

Recommended Posts

And so, i'm going to take a cruise up, over the weekend. Along the GOR. All i heard about the GOR is that it goes up to Geelong.

So i would like to know, what's fun, and where's good to spend the night?

And i would also like to do some fishing, i've got my gear and i'm really itching to wet my line. Or should i give it a miss since its winter?

Thanks guys!

Link to comment
https://www.sau.com.au/forums/topic/283425-great-ocean-road/
Share on other sites

the great ocean rd starts just after torquay

which is about 25 minutes past geelong

head up princes hwy past geelong

and continue past geelong, don't go through geelong its a waste of time

follow the signs to great ocean road

you will pass through anglesea (can fish here)

you will pass through pt road knight (can fish here)

you will pass through aireys inlet (can fish here)

you will pass through lorne (can fish here)

you will pass through appollo bay (can fish here)

the best roads are between aireys inlet / fairhaven and lorne

try and leave space for slow cars

dont sit up someone's ass and annoy them

dont get overzealous and come off / get into trouble

take it easy and have fun but be careful, some of the corners can suprise you if you arent experienced

on the way home from lorne, you can head back via the otways, these roads are great

you can stay basically anywhere, recommendations are lorne or appollo bay overnight

apollo bay is a fair drive, 2.5 hours from geelong so plan ahead

there is premium in anglesea, shell on the right hand side

lorne is the typical place most people drive to in a day trip

you can fish on the pier there, lots of people do

and the fish co-op there has great seafood and fish for lunch/dinner to cook up

the great ocean rd starts just after torquay

which is about 25 minutes past geelong

head up princes hwy past geelong

and continue past geelong, don't go through geelong its a waste of time

follow the signs to great ocean road

you will pass through anglesea (can fish here)

you will pass through pt road knight (can fish here)

you will pass through aireys inlet (can fish here)

you will pass through lorne (can fish here)

you will pass through appollo bay (can fish here)

the best roads are between aireys inlet / fairhaven and lorne

try and leave space for slow cars

dont sit up someone's ass and annoy them

dont get overzealous and come off / get into trouble

take it easy and have fun but be careful, some of the corners can suprise you if you arent experienced

on the way home from lorne, you can head back via the otways, these roads are great

you can stay basically anywhere, recommendations are lorne or appollo bay overnight

apollo bay is a fair drive, 2.5 hours from geelong so plan ahead

there is premium in anglesea, shell on the right hand side

lorne is the typical place most people drive to in a day trip

you can fish on the pier there, lots of people do

and the fish co-op there has great seafood and fish for lunch/dinner to cook up

Is it really 2.5 hours to apollo bay from geelong? Feels much quicker than that and that's taking it quite easy..

It takes me approx 2.5hrs to get from Geelong to Apollo Bay on a good run..

Its roughly a bit over an hour from Geelong to Apollo Bay IMO.

You can fish basically anywhere, do some internet research and find out what area's have schools biting the weekend you choose to go.

Apollo Bay is where i would stay, and on the 2nd day go down to the 12 Apostles and similar tourist things to checkout (lunch @ Port Campbell)

the best roads are between aireys inlet / fairhaven and lorne

Nope, it's between Lorne and Wye River IMO.

Ten odd kays of twisty goodness, both uphill and down.

And seeing as most of the daytrippers stop at lorne, there less people doing 30kph while they look at the ocean.

Well, no sleeping in the car, i want real beds i think.

Thanks for the list of places to visit!

Will go plan my route.

I was thinking of getting a boat to fish, but i dont reckon there is enough time, so i guess i'll just leave my heavy gear at home and fish from the shore.

Edited by xALmoN
Nope, it's between Lorne and Wye River IMO.

Ten odd kays of twisty goodness, both uphill and down.

And seeing as most of the daytrippers stop at lorne, there less people doing 30kph while they look at the ocean.

100% agree...... lorne to Wye / Kennet River is better........but my personal favourite stretch is between Kennet River and Smythes Creek

oooh, So i've planned to drive up all the way to Apollo Bay, play and chill for the night, then on the way home, catch all the sights, what do you guys think?

Good idea mate, but you need to take your SURFBOARD!

Plenty of solid waves to be had along the way...

haha.

points i'd look at for a surf, a place called urquharts bluff, if the surf is big enough check out Point Roadknight, as well as lorne and Apollo bay might even have a wave!

Good idea mate, but you need to take your SURFBOARD!

Plenty of solid waves to be had along the way...

haha.

points i'd look at for a surf, a place called urquharts bluff, if the surf is big enough check out Point Roadknight, as well as lorne and Apollo bay might even have a wave!

Lol, dude, i only know how to windsurf, and i heard surfing is a whole lot of difference, but its winter now, and i'm deathly afraid of the cold. Maybe in summer, i'll go again.

Lol, dude, i only know how to windsurf, and i heard surfing is a whole lot of difference, but its winter now, and i'm deathly afraid of the cold. Maybe in summer, i'll go again.

hahaha xALmoN the water is only 11 degrees mate!

Get a wetsuit and you'll be fine, but windsurfing is awesome!

:D

Ah, i've just got back!

And i guess i really need a surfboard here in Australia. It looked so fun, i went past some places with some people surfing and it looked awesome, i should try it when summer comes around.

And i loved the drive there, wild dog road is awesome, was scary because you dont really see roads like that in Singapore. And the drive back on the GOR wasn't half bad. There wasn't many cars hogging the road so it was a smooth journey bad. Not half bad...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...