Jump to content
SAU Community

Recommended Posts

And so, i'm going to take a cruise up, over the weekend. Along the GOR. All i heard about the GOR is that it goes up to Geelong.

So i would like to know, what's fun, and where's good to spend the night?

And i would also like to do some fishing, i've got my gear and i'm really itching to wet my line. Or should i give it a miss since its winter?

Thanks guys!

Link to comment
https://www.sau.com.au/forums/topic/283425-great-ocean-road/
Share on other sites

the great ocean rd starts just after torquay

which is about 25 minutes past geelong

head up princes hwy past geelong

and continue past geelong, don't go through geelong its a waste of time

follow the signs to great ocean road

you will pass through anglesea (can fish here)

you will pass through pt road knight (can fish here)

you will pass through aireys inlet (can fish here)

you will pass through lorne (can fish here)

you will pass through appollo bay (can fish here)

the best roads are between aireys inlet / fairhaven and lorne

try and leave space for slow cars

dont sit up someone's ass and annoy them

dont get overzealous and come off / get into trouble

take it easy and have fun but be careful, some of the corners can suprise you if you arent experienced

on the way home from lorne, you can head back via the otways, these roads are great

you can stay basically anywhere, recommendations are lorne or appollo bay overnight

apollo bay is a fair drive, 2.5 hours from geelong so plan ahead

there is premium in anglesea, shell on the right hand side

lorne is the typical place most people drive to in a day trip

you can fish on the pier there, lots of people do

and the fish co-op there has great seafood and fish for lunch/dinner to cook up

the great ocean rd starts just after torquay

which is about 25 minutes past geelong

head up princes hwy past geelong

and continue past geelong, don't go through geelong its a waste of time

follow the signs to great ocean road

you will pass through anglesea (can fish here)

you will pass through pt road knight (can fish here)

you will pass through aireys inlet (can fish here)

you will pass through lorne (can fish here)

you will pass through appollo bay (can fish here)

the best roads are between aireys inlet / fairhaven and lorne

try and leave space for slow cars

dont sit up someone's ass and annoy them

dont get overzealous and come off / get into trouble

take it easy and have fun but be careful, some of the corners can suprise you if you arent experienced

on the way home from lorne, you can head back via the otways, these roads are great

you can stay basically anywhere, recommendations are lorne or appollo bay overnight

apollo bay is a fair drive, 2.5 hours from geelong so plan ahead

there is premium in anglesea, shell on the right hand side

lorne is the typical place most people drive to in a day trip

you can fish on the pier there, lots of people do

and the fish co-op there has great seafood and fish for lunch/dinner to cook up

Is it really 2.5 hours to apollo bay from geelong? Feels much quicker than that and that's taking it quite easy..

It takes me approx 2.5hrs to get from Geelong to Apollo Bay on a good run..

Its roughly a bit over an hour from Geelong to Apollo Bay IMO.

You can fish basically anywhere, do some internet research and find out what area's have schools biting the weekend you choose to go.

Apollo Bay is where i would stay, and on the 2nd day go down to the 12 Apostles and similar tourist things to checkout (lunch @ Port Campbell)

the best roads are between aireys inlet / fairhaven and lorne

Nope, it's between Lorne and Wye River IMO.

Ten odd kays of twisty goodness, both uphill and down.

And seeing as most of the daytrippers stop at lorne, there less people doing 30kph while they look at the ocean.

Well, no sleeping in the car, i want real beds i think.

Thanks for the list of places to visit!

Will go plan my route.

I was thinking of getting a boat to fish, but i dont reckon there is enough time, so i guess i'll just leave my heavy gear at home and fish from the shore.

Edited by xALmoN
Nope, it's between Lorne and Wye River IMO.

Ten odd kays of twisty goodness, both uphill and down.

And seeing as most of the daytrippers stop at lorne, there less people doing 30kph while they look at the ocean.

100% agree...... lorne to Wye / Kennet River is better........but my personal favourite stretch is between Kennet River and Smythes Creek

oooh, So i've planned to drive up all the way to Apollo Bay, play and chill for the night, then on the way home, catch all the sights, what do you guys think?

Good idea mate, but you need to take your SURFBOARD!

Plenty of solid waves to be had along the way...

haha.

points i'd look at for a surf, a place called urquharts bluff, if the surf is big enough check out Point Roadknight, as well as lorne and Apollo bay might even have a wave!

Good idea mate, but you need to take your SURFBOARD!

Plenty of solid waves to be had along the way...

haha.

points i'd look at for a surf, a place called urquharts bluff, if the surf is big enough check out Point Roadknight, as well as lorne and Apollo bay might even have a wave!

Lol, dude, i only know how to windsurf, and i heard surfing is a whole lot of difference, but its winter now, and i'm deathly afraid of the cold. Maybe in summer, i'll go again.

Lol, dude, i only know how to windsurf, and i heard surfing is a whole lot of difference, but its winter now, and i'm deathly afraid of the cold. Maybe in summer, i'll go again.

hahaha xALmoN the water is only 11 degrees mate!

Get a wetsuit and you'll be fine, but windsurfing is awesome!

:D

Ah, i've just got back!

And i guess i really need a surfboard here in Australia. It looked so fun, i went past some places with some people surfing and it looked awesome, i should try it when summer comes around.

And i loved the drive there, wild dog road is awesome, was scary because you dont really see roads like that in Singapore. And the drive back on the GOR wasn't half bad. There wasn't many cars hogging the road so it was a smooth journey bad. Not half bad...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty this is your red flag. In MAP based ECU's the Manifold pressure X RPM calculation is how the engine knows it is actually...running/going through ANY load. You are confusing the term 'base map' with your base VE/Fuel table. When most people say 'base map' they mean the stock entire tune shipped with the ECU, hopefully aimed at a specific car/setup to use as a base for beginning to tune your specific car. Haltech has a lot of documentation (or at least they used to, I expect it to be better now). Read it voraciously.
    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
×
×
  • Create New...