Jump to content
SAU Community

Aug Deca - Wrap Up

R31Nismoid

By R31Nismoid,
in Victoria

 Share

Recommended Posts

KezR33 Veteran

KezR33

Posted
Posted
If you can tell the difference with a relatively stock car when you add a rear strut brace then you're probably going as fast as possible already. Don't waste your money. Keep your eye out for some used semis, that's what I do and you get them for a fraction of the cost. People will tell you that they're nowhere near as good and blah blah but they're still better than most streets and will last much longer than streets when being driven in anger. Save your money for the coilovers (DO NOT buy second hand - I've seen that many stuffed used ones), get some used semi's and you will be paddocks quicker.

PS the driver training day will always be money well spent. You'll get faster and safer. I think we all could use a lesson.

The rear strut was recommended (no front) to help with the under steer as the Supra is very front heavy. Just going off other people's advice.

  • Replies 358
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

scotty014 Veteran

scotty014

Posted
Posted
The rear strut was recommended (no front) to help with the under steer as the Supra is very front heavy. Just going off other people's advice.

id be looking at some swaybars. im going to get the whiteline ones. it will make your car sit flatter around the corners.

Birds Grand Master

Birds

Posted
Posted
id be looking at some swaybars. im going to get the whiteline ones. it will make your car sit flatter around the corners.

Agreed. Rear swaybars do wonders for understeering cars, probably moreso than strut braces.

KezR33, driving tuition is a great spend for getting around quicker. I'd recommend some engine mods, but given you're N/A the smartest mod you can do IMO is a GTE conversion :P

Check out the suspension, but if you don't have the money to spend on coilovers I recommend replacing all your bushes for polyurethane and installing a big f*** off rear swaybar. Will give you some nice firm handling without even touching the springs/shocks, plus some oversteer to play around with. A set of grippy tyres is always good but they don't have to be expensive. You're going to fry them anyway so if you're on a budget perhaps look at some of the dry only street tyres. I remember a while ago a car magazine did a tyre test and the $100 Federal tyre performed right up there with the $300 tyres in the slalom/braking (it was f***ing pants in the wet though). Perhaps slap these on some shitty spare wheels and save them for DECA type events?

NUTWGN Proficient

NUTWGN

Posted
Posted (edited)

*steals some of Bec and Juz's popcorn and settles in*

I cant believe I got this far, all I wanted was some photos and the results :P

Some awesome photos there, Thanks to all for uploading!

Edited by NUTWGN
AGE Veteran

AGE

Posted
Posted
Let us introduce you to Troy.... He is KING.

Nothing compares. haha!

here here :P
TROY IS GOD!!

The question is not what did troy do? But what hasn't he done?

I think Troy should win Deca even though he is in India.

It is the least we could do! :huh:

In Honour of the Gate!!

TOTALLY AGREE

brisaward.jpg

dave1200 Collaborator

dave1200

Posted
Posted
The rear strut was recommended (no front) to help with the under steer as the Supra is very front heavy. Just going off other people's advice.

A strut brace is not really a suspension component. If you are having understeer issues a strut brace is not going to fix it. Sure they have their place and they make suspension more tunable when you are trying to find that extra bees dick of perfomance but you will not notice the difference on a car with stock suspension.

Like someone said, you could get a thicker rear swaybar but I would be looking towards your front end and improving grip. Maybe some adjustable upper arms for a little camber may be enough and that's cheap.

_Ryan_ Grand Master

_Ryan_

Posted
Posted
ill be running semis.....mwwwaaaahahhaha

Did you see Roman's tyres? flatspotted snow tyres on the front, and half decent rubber on the rear :S

My aim is too have a TPS and brake pads by then... pads are yet to be ordered, TPS, well the wrong one was sent weeks ago, and the replacement was due down last week... So maybe by november, hopefully this year.(This is not my mechanics fault, solely the parts supplier who won't refund us, only replace)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • joshuaho96
      Jacks that fit under GTR lips that can reach the subframe?

      By joshuaho96 · Posted

      On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
×
×
  • Create New...