Jump to content
SAU Community

Recommended Posts

Furthermore everyone should dry sump without question regardless of their needs or requirement as risk is not good.

problem with a dry sump setup is cost - for something decent you are looking at up to 7k

Ofcourse every oil pump is a risk. But we dont log on here to see every couple of months a comment about how my std oil pump just killed my motor, or my (insert brand name here) pump just shat itself...its always the N1 pumps that come up either on here, or in conversation/passing comment or someone at the track blows one up.

Its obvious the risk is higher using one, its virtually the point of this thread. Hearing one bad story should be enough. It was for me, except ive been exposed to multiple, whether on here or at the track. Im sure alot of people who have seen this thread will agree with myself and the others who share the same opinion about N1 pumps.

Its simple. You get whatever puts your mind at ease and fits in with your budget.

Dry sumps all round for everybody.....hooray :P

Edited by r33_racer

guys loosing sleep over the pumps go and buy the reinik (edit reimax... still getting used to name change) gears. they are very highly regarded in japan and folks smarter than me have been using them in aus with great success. they may not be jumping up and down telling everyone about it, but the price is right, they have the research behind them to back up their product and that should be the end of your oil pump problems.

If you're spending 7k on a dry sump setup you're spending too much.

nitto would be my choice, crd has been exposed to all oil pumps available and i trust the opinion of a man who started modifying gtr's when we were all still playing with matchbox cars and smashing them with hammers to simulate an accident

dry sump for me is overkill for a weekend warrior

guys loosing sleep over the pumps go and buy the reinik (edit reimax... still getting used to name change) gears. they are very highly regarded in japan and folks smarter than me have been using them in aus with great success. they may not be jumping up and down telling everyone about it, but the price is right, they have the research behind them to back up their product and that should be the end of your oil pump problems.

Where are these available from?

I still think the best fix would be a splined collar/gear.

Where are these available from?

I still think the best fix would be a splined collar/gear.

Cheapest Reimax gear set i can find so far is 670 au + del. through Greenline.

http://www.greenline.jp/catalogue/bproduct...&fromlink=1

It probably is best value for $$$ if you are planning on taking your engine to pieces or in the build stage.

Edited by Alf
Lookin forward to these new gears!

would they work on a stock pump? or does the stock pump not provide enough pressure?

say compared to a n1?

They can be made to suit a stock pump, but these first ones are going to be for the N1 pump.

Pump selection should be left upto the engine builder.

I to had a n1 let go on e and decided to go external pump

i have had no probles since and thrash it of limeter all day at the track and the cost was not to bad

$1000 for peterson single stage pump

$200 for mandrel for the crank

$200 for speedflow fittings

and 1 day in the gargae making a bracket for the pump

This is the way to go imo

I to had a n1 let go on e and decided to go external pump

i have had no probles since and thrash it of limeter all day at the track and the cost was not to bad

$1000 for peterson single stage pump

$200 for mandrel for the crank

$200 for speedflow fittings

and 1 day in the gargae making a bracket for the pump

This is the way to go imo

That's under valuing it a bit to say the least. Add another $600 and ur closer to the mark you woulda spent. (not saying u didnt spend that but just adding this so everyone doesn't jump to the conclusion it only costs $1400 to do a complete external oil pump setup)

Shane, are there different thickness N1 gears? I remember getting confused when I last looked at the Reimax ones

There are indeed my good friend. So what we'll have to do is the person after a set will have to specify what thickness gears they are after.

Group buy thread here - http://www.skylinesaustralia.com/forums/Sp...ts-t285926.html

There are indeed my good friend. So what we'll have to do is the person after a set will have to specify what thickness gears they are after.

Group buy thread here - http://www.skylinesaustralia.com/forums/Sp...ts-t285926.html

Cool, I'll try get my oil pump off this weekend and confirm thickness.

FWIW, here are some parts numbers that I came up with and pricing for an external oil pump kit. I only really needed to find someone to make a bracket for the pump itself, most of the parts are there minus the hosing and belt. Might be a couple of extra fittings required depending on where / how you wanted to mount it.

post-20486-1251791626_thumb.jpg

Some of the prices may have changed since I did it (about 4 months ago)

FWIW, here are some parts numbers that I came up with and pricing for an external oil pump kit. I only really needed to find someone to make a bracket for the pump itself, most of the parts are there minus the hosing and belt. Might be a couple of extra fittings required depending on where / how you wanted to mount it.

post-20486-1251791626_thumb.jpg

Some of the prices may have changed since I did it (about 4 months ago)

JWAuto are doing CNC brackets...their work is incredible...the same CNC machinist 888 Racing use. Top shelf stuff. They are doing the brackets in a kit only though...im doing a group buy on them as soon as they are ready. I saw one of their VL CNC'd rocker covers to suit single cam engines running roller rockers...porno! Ill see if i can get a pic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
    • Yeah, Duncan is helping sell me back to Android devices. I've hated the whole Android head units due to their speed issues. Even in my old Hyundai Kona (2022 model), it behind the scenes was Android, and slow and shitty to start up. Once running wasn't bad, but still a good 15 to 30 seconds.
    • My roof rails are off atm on the E39 until the rust is fixed. I did find another little bit of surface rust under the rails when I took them off. As @soviet_merlin said I'd just leave them alone unless you're planning on ensuring they're properly sealed. I was on the fence about leaving them off as the delete is still a thing in BMW E39's but I feel like the car is missing something (er, it is, der) with them off and I'm looking forward to putting them back on.
×
×
  • Create New...