Jump to content
SAU Community

Recommended Posts

Hello all,

I see some of the members from afew years ago are still posting on here :D Some will remember me I used to drive a Silver 1999 R34 GTR V-Spec around the streets of Adelaide with the number plates COPYME for a time in 2003/2004.

At the time I was 21 years old, had my heart set on having a R34 GTR and found one at a (now defunct) garage in Victoria. First mistake I made was falling in love with that particular vehicle which stopped me from being Impartial about the purchase. In Hindsight, Monro was selling his Blue R34 GTR V-Spec which was a far better example and an individual far more deserving of my funds.

I purchased the car and brought it back to Adelaide where almost immediately the after market greddy turbos failed (both), I would later find out that the sound of a can rattling in my exhaust while having the inability to achieve boost was caused by one of the turbine fragments sitting in my cat. A part of the braking cylinder began bleeding fluid aswell. I was understandably thinking by this stage that I had purchased a 100k lemon, and thought my Victorian inspection was less than thorough.

Before I digress further I'am aware of the general rules and guidelines for the use of this site, which means I will be careful not to name the businesses or individual(s) or make what could be seen as defamatory remarks about. I understand that "Informing people via PM's is tolerated as it is not a public message." Therefore any individual who would like me to elaborate further I can send you a PM.

There was a performance garage near my house just off North East Rd which came highly recommended. I spoke to the owner before being directed to what I shall refer to as "The mechanic", I was aware of him from HPI magazine and word of mouth. He looked over the RB26, my dead turbos and the engine bay. We talked about some of the mods I wanted to do to the car and he told me what needed to be done in the way of repairs, he said he would order the parts and call me to bring the car in I gave him my mobile number and returned the car to my garage for the time being.

I was called the next evening by the mechanic and was invited to his house near tea tree plaza, he said he wanted to discuss the mods and repairs I was looking to have done and he thought we could work out a deal for him to do the work at a cheaper rate than the garage. I was interested in further discussion so I headed over, we sat at his dinner table and he talked about his background, his fathers business in Queensland where he had a similar role and his skills. Which confirmed some of what I knew already.

He said that He would guarantee the work he did to my GTR or my money back, and explained how much he would charge for labour and how he could get the parts I wanted at a discount, he also said that he would invoice all the work at the end through his own Limited Company. Everything was broken down, I knew how much all the parts were going to cost for me to source and the end total will labour was alittle over 40k. He said that the car would produce over 380kw at the wheels.

I felt his reputation proceeded him and there was no reason to be done over for lack of a better word. The deal was agreed and I forwarded about 20k a week later by TFT transfer, he said he would cancel the order for the parts I had requested through his work once they arrived and pay for them out of the deposit on the works. I sent the car to a private workshop near the raceway which the mechanic used off an associate and was told it would be ready within 3 weeks. This was in August 2003, the car was not ready till November, apparently due to parts delays.

The car seemed to run amazingly for about a week, then it started to soil plugs after every 15 kms, when driving the car back to the private garage he used the engine seized. Apparently due to a oil line breaking and leaking all the oil out of the engine. However when the engine was removed later on the sump was still full and there was no fault in the warning gauges.

The Mechanic took complete responsibility saying he would rebuild labour cost free. I thought the line breaking was just one of those things, wished I had installed full braided line and said ok. I ordered a N1 block through the mechanic, 2.8 litre HKS kit and afew other things I ordered and paided for these so i know they were sent to him, air freight from japan.

It was into early 2004 when I got the car back works complete, I had been visiting the car to see some of the works completed, due to work travel commitments I wasn't present for the block arrival or the installation of internals. Upon return everything look kosher.

I ran the car in, the mechanic didn't make himself available for the vehicle to be Dyno-ed and had someone less do so. I was not happy and wanted a refund as tuning was included in the build cost.

The complete bill came to alittle over 80k, I was not given complete invoicing and was becoming unable to get a call returned, I was going to head down to his employer off North East rd when I suddenly learned that he was no longer there.

A sudden financial issue ment I put the car up for sale was contacted by several interested parties in Melbourne, put the car on the back of a truck and hauled it over there. The car was sold. Upon return to Adelaide I received an angry call from the buyer and his mechanic, the internals weren't as I described, It wasn't a N1 block and incorrect screws, bolts and fasteners had been used which had caused the manifolds to warp. The car was sold below what it owed me, I sent them some parts that I had at home to try and make peace.

Then the mechanic reared his head and called my parents aswell as my self saying I owed him money. I had also heard he had paided 10k cash, on the same day I paided him in cash for parts on the second build, for a nice 750 Suzuki road bike.

I asked him if he was still in Adelaide he said he was and I told him that I would be getting some legal advice before any family members or myself had any further conversations with him.

Shortly after I received a phone call from someone I did not know, but had heard of stating he was from a certain group of people, he knew alot about me, I was intimidated and was convinced it was in my interests to pay him the funds I apparently owed The mechanic as he had "purchased the dept."

I'am not going into the details surrounding the exchange, however what I will disclose is that I also had the car I was driving at the time taken from me aswell.

I learned that The Mechanic had swapped parts people had paided for in builds elsewhere and one of the reasons he was in Adelaide was dept issues, there is also a time where a settlement was reached with one of his customers, within a few days of funds being paided to his bank account by myself. A deposit was paided on a queensland property at that time secondly.

All has now been resolved, I allowed myself to be taken advantage of and now have the benefit of hindsight for the future. Hopefully most will not fall into the same pot hole with the level of expenditure and time, due to youth, arrogance and stupidity, But I feel there may be a cautionary lesson to be learnt for some if not all.

post-65917-1251058980_thumb.jpg

post-65917-1251059019_thumb.jpg

post-65917-1251059106_thumb.jpg

post-65917-1251059134_thumb.jpg

post-65917-1251059168_thumb.jpg

post-65917-1251059198_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/284763-return-r34-gtr-a-cautionary-tail/
Share on other sites

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Sad, sad story.

Yes, you are not the only one Dick screwed over. He will get what is coming to him one day.

Not only the fact that he screwed you over, but he also then screwed Mark over by doing this job 'privately' rather than through that particular workshop.

Double sad too, as like you said Munro sold his Bayside Blue 34 around that time, and that thing was an absolutely immaculate example, and he often pines over selling it when we have a few beers :D - I reckon it is the only car he has ever regretted selling.

wow, hard luck story right there, definately sucks to hear. Unfortunately scum like this bloke continue to operate in all industries of our fair country.

glad to hear its all sorted now :D

btw, its "paid", not "paided" :)

PS, could you shoot me a pm with the businesses and mechanics name? thanks :(

Wow thats crazy,

Damo siff you need to go and correct spellings << haha did that cause it prolly burns you too see incorrect gramma :D

If you can put 1 and 1 together we have already been told the workshop but they weren't at fault as work wasn't carried out by them

how did you have access to so much money at such an age - without any restrictions, or double checks, or family / mates advice (ie like nah dont spend 40k on a engine build) ? :down:

that kinda cash at the time would have been much better off on some land / house + R32 GTr......

Ive had the flipside experience - build up of a cbr900rr fireblade at low cash price in a backyard garage. minimal money well spent :)

BUT - since 18 Ive been paying my home, choosing wisely - so maybe perhaps Im more frugal when investing? not as care-free seeing funds wernt available?

obviously you've learned numerous lessons, albeit the hard way.

you chose the blue pill. obviously the red pill would have been a better choice.

next time ey

As far as i know the person that did this is no longer in the country.

Rumour is he headed to the UAE!!!

Romour mill works well doesn't it!!! Thats exactly what i heard as well...After he screwed over said workshop down here he moved his buisness back to qld then built some u beaut drag car for an oil magnate in UAE and moved his whole workshop over there...I heard it was a 5 year contract to look after said car but not sure if thats true or not...

I remember Munro blasting past me and a mate down the freeway one friday night as well, along with said person in his 32 GTR...Through the tunnels it was the loudest and greatest thing i've ever heard 2 gtr's on full song mmmmmmmmmmmmmmmmmmmmmm

Spending that kind of money at such an age is quite achievable with certain circumstances :down:

Glad to hear you've got it all sorted.

You got me worried with the can rattle in the exhaust part! Because my 32 GTR did the exact same thing haha... but it's just a collpased centre muffler baffle in my situation :)

I wonder if I'm the only one stunned at the idea of a 21 year-old having access to spending $180K+ (if I've read that right) for just a car ...
how did you have access to so much money at such an age - without any restrictions, or double checks, or family / mates advice (ie like nah dont spend 40k on a engine build) ? :D

that kinda cash at the time would have been much better off on some land / house + R32 GTr......

Ive had the flipside experience - build up of a cbr900rr fireblade at low cash price in a backyard garage. minimal money well spent :)

BUT - since 18 Ive been paying my home, choosing wisely - so maybe perhaps Im more frugal when investing? not as care-free seeing funds wernt available?

obviously you've learned numerous lessons, albeit the hard way.

you chose the blue pill. obviously the red pill would have been a better choice.

next time ey

;) Don't make presumptions about me or my past or current level of expendable income. Would you walk up to a guy in the street and say nice car how did you pay for that? Don't you think the money would have been better spent on ........ I'am not going to elaborate and would prefer not to have I' am 18 maybe you should have spent the funds on .......... posts.

If you have the funds, and you have a passion for cars, the cost of a purchase and a build can become exorbitant my current R34 which I have been tinkering with for the best part of two years is at about the same level of expenditure. Hopefully some will agree?

The rumour mill spun alot of details about "the mechanic" after selling the COPYME GTR I was surprised at how many people I met in QLD and NSW who had similar experiences to tell.

...Double sad too, as like you said Munro sold his Bayside Blue 34 around that time, and that thing was an absolutely immaculate example, and he often pines over selling it when we have a few beers ;) - I reckon it is the only car he has ever regretted selling.

I do regret not buying Munro's R34 GTR it was a beautiful example. I just happen to have photos of it taken when I was considering the purchase. Just to help those who are not familiar with why I' am still kicking myself!! :D and a journey down memory lane for those familiar with the vehicle.

post-65917-1251095967_thumb.jpg

post-65917-1251095999_thumb.jpg

post-65917-1251096158_thumb.jpg

post-65917-1251096241_thumb.jpg

post-65917-1251096277_thumb.jpg

post-65917-1251096305_thumb.jpg

post-65917-1251096335_thumb.jpg

post-65917-1251096370_thumb.jpg

post-65917-1251096403_thumb.jpg

Edited by COPYME AGAIN

Sad story, but good to hear it was all sorted out in the long run.

I guess what COPYME is trying to put across, is that, no matter how good the recommendation of a workshop or mechanic, best do your home work.

Like what was said previously, karma will catch up with him. People in the UAE dont take being ripped off so nicely

Sad story, but good to hear it was all sorted out in the long run.

I guess what COPYME is trying to put across, is that, no matter how good the recommendation of a workshop or mechanic, best do your home work.

Like what was said previously, karma will catch up with him. People in the UAE dont take being ripped off so nicely

The UAE is surrounded by desert I'm sure there is alot of holes in those deserts and alot of their problems are solved with those holes. Love the airconditioned bus stops in Dubai ;):-)

Edited by COPYME AGAIN

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
×
×
  • Create New...