Jump to content
SAU Community

Recommended Posts

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

the 3sgte doesnt have the same appeal as the screaming 4age.. both are a bit on the expensive side to buy... a celica is not a supra and the galant is not an evo and both are front wheel bias.. i thought a bout a gsr lancer, but its not an evo, so scrap that idea.

MK3 Supra...with the 1JZ in it. Some come factory with them, although much rarer than the 7M-GTE. Terrific handling cars and you won't be disappointed by that engine.

fair enough so if u like a screaming 4age you should slot one on them into a old school corolla.... i have a ke35 coupe with a 105kw small port which is fun to drive.... would even suggest a 4agze. 4age is great little revy motor but some forced induction would make it that much better.

Edited by rgr34

datsun with sr20 or a built L20 (a mate of mine had one putting out 155hp at the wheels, non turbo)

mitsubishi sigma with sr20 (same mate that had the built L20 had a sigma with sr20 running mid 12's on stock ecu and turbo)

gemini with sr20

ke70 with either sr20 or 4age/4agze

LC/H/J torana with a built 186 or 202, or sr20 or rb25 in it

i have to say that despite not being a fan of torana's, my brother in law has a very worked 186 in it (big cam, bored out to about 196, bigger carbies, etc) and it sounds very tough and goes very well. and looks pretty good too.

arent Galant Vr4's All Wheel Drive?

yes they are... and they have a 4g93 (or is it 4g63) just like the evos... but the layout, as with the evos is designed off the base car being FWD... evos have alot more develpment in the awd department so they dont behave like a fwd so much... the galants arent the same though.

wrxs are the same... but with their north south engine its a tad easier to make more rwd bias.. or you can just disconnect the front driveshafts and have a total rwd.

fair enough so if u like a screaming 4age you should slot one on them into a old school corolla.... i have a ke35 coupe with a 105kw small port which is fun to drive.... would even suggest a 4agze. 4age is great little revy motor but some forced induction would make it that much better.

while i agree with your thoughts... and am a huge fan of forced induction... it costs alot to do it properly, this project car isnt going to be a slap together job.. adding forced induction is adding in more components that need to be at a specific level to match the car.. the price of the intercooler and piping at the level of craftsmanship i want is the same cost as a pair of well tuned delorto carbies.. for not a great deal more gain in the real world.. given that with the modest (compared to a stock gtr) power of a modified 4age will still be a handful in a light car on a tight road in a real driving experience.. having more wont necessarily make it better.

What about a REAL RACE Car? Ran inside the first five positions at Bathurst with half the capacity.

Held the fastest speed down conrod before the chase was installed and is woth nothing these days.

Except maybe to me and a few diehards...

Japanese widebody is probably to expensive but a local one is better with the 4G63BT and Manual GB.

Just make sure it has a LSD.

1st%20STARION.jpg

thanks for all the helpful suggestions people... but i think a little project has fallen into my lap. a 1990 ae92 corolla seca sx, used to be my gf's and then we sold it to a young guy she used to work with... he broke the gearbox shortly after and its been parked at his house ever since.. now out of rego and in need of a bit of work.

plan is to pick it up for a few hundred, strip it down, do some panel work, paint it in original red, some nice springs and shocks, 15" wheels and good tyres, and rebuild the 4age with a little bit of work done to the head, and do the gearbox of course..

it should suffice my needs for working on something without biting off more than i can chew at the moment, it will be a neat little car and go, turn and stop reasonably well, but i wont get attached to it.. if i plan it right and nut out some bargain bits, i should be able to make some money off it in future as these things in good nick can go for up to $4000 as its an ideal car for a p plater.... giving me some moolah to invest in another project.

after that... a friend with no interest in cars has a tidy ke55 with a blown 4k... sitting in his driveway doing nothing. that should keep me busy, if i can do the same again, and make a little bit of money, then i can invest in something a bit better... maybe start up a little wrecks to riches sought of deal. i have the time, know how, and equipment.

after that... who knows... a gtr if the budget allows, an ae86 if it doesnt.

cheers

Linton

mate the corolla ae92 would be a great project but its as front wheel drive as you can get! u should take the 4age out of it and put it in the ke55 u mentioned! keep the old school rollas on the road!

i dont have an issue with fwd! i prefer rwd car thou :P ......especially is its going to be for some track use etc..... the thread starter was kind of steering away from fwd format from what i read thats all!

Edited by rgr34

Datsun All the way... hell no to the subaru unless you have a fetish for rebuilding gearboxs.

My dream would be to do a early 60's datsun fairlady... they are worth 20-30k restored

http://cgi.ebay.com.au/datsun-fairlady_W0Q...id=p3286.c0.m14

Datsun All the way... hell no to the subaru unless you have a fetish for rebuilding gearboxs.

My dream would be to do a early 60's datsun fairlady... they are worth 20-30k restored

http://cgi.ebay.com.au/datsun-fairlady_W0Q...id=p3286.c0.m14

my father in law works for a place that makes step side bodies for the old F trucks and his boss's wife has one. they only just got it fully together earlier this year after a few years (was only worked when they weren't busy). it started out in pretty bad shape. don't think it was complete to start with.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
    • Very hard to make out what you mean, is it the squarish hole with redline shockproof (probably) under it? Is that pic from on top of the engine with the firewall to the left of pic and engine to the right? Either way, spray the area liberally with degreaser and try again, maybe circle the part you are worried about
×
×
  • Create New...