Jump to content
SAU Community

Recommended Posts

hi guys..im having problem with my ssqv bov..i bought the bov thru here so its 2nd hand..the problem is that everytime i rev it while in idle....it goes thru the pod and not the bov..so i get a flutter....so i checked my vac lines and loose the adjustment and its still doing the same...flutter.......so i checked the bov....it seems that the bov is not popping the way it is meant too...so i grabbed a stick and while i revved the car i pushed inside the bov and it seemed that it has a hard tension.... but i adjusted the back to loose....so what i did is to clean the inside...which i did.....chucked it back on and it still doing the same problem?? im running on 12psi with all the support mods.......plz someone help me....i already checked all the forums but they are not the same problem as i have....i need your opinions..thanks a bunch

Link to comment
https://www.sau.com.au/forums/topic/286935-hks-ssqv-bov-blocked/
Share on other sites

ok..ima try dat now..however i saw on one of the forum that to cut the spring a to a desired tension....however ima try and go for a ride now and will tell ya's the outcome...if it still doing the flutter i may cut the spring....need help guys

im having the same issue with my turbosmart type 3 plumb back ( dont have it on the car currently) ive cleaned it out so the piston slides nice but its only at higher revs when it will open at lower revs it simply doesnt open and i get flutters. have thought about buying a different rate spring to go into it to make it a bit easier for it to open. Im only running stock boost tho (9psi). interesting to see how this is fixed

yea it does flutter.....i rev it up to 4000rpm and it still flutters......not enuff boost on 12psi??? btw thanks for quick rep

sitting at idle isnt the best time to judge it. go for a drive rev it to about 4 or 5 and then see if it still flutters

i just came back from driving...i redline most of the gears and it still flutters..my only choice now is to cut bit of the spring inside...i didnt everything...and still flutters....opinions anyone?

real or fake hks one? have you loosened it to the lowest setting. make sure you dont over do it or you will screw up the bov. the screw should only come out about 1.5-2cms and then stop. if you keep going you will unwind it off from something on the inside then break it. was it working when you bought it or is this the first time you put it on? maybe you get ripped off and sold a broken/fake one.

the flutter is the sound of the turbo spinning backwards, sounds cool but its not awesome as it puts quite a bit of load on the compressor wheel and the shaft.

ROFL!!!!!!! :( Try blowing into a leaf blower, see what happens.

But i digress, lets not start that debate again.

Just loosen the screw on the BOV. If all else fails, put the stocker back on

Are you positive that you have loosened it and not tightened it mate....i ran a GFB Stealth FX for a while ages ago and on the hardest setting it would flutter but on the lowest setting it would just vent....so maybe try turning it the other way and see if that makes a difference....Flutter isnt all that bad

also i heard it was unhealthy for the car to flutter coz its going back to turbo or something....can someone confirm....
the flutter is the sound of the turbo spinning backwards, sounds cool but its not awesome as it puts quite a bit of load on the compressor wheel and the shaft.

I have been running my stock turbo with the BOV blocked off....just for the flutter...car is running 12psi all day everyday for the last 2 years and making decent power 214.4rwkw on 12psi with the stock turbo and its a R33 S1 no issues whatsoever and it gets a thrashing as its a weekender

is it true that if u don't recirculate the excess pressure from Ur bov back into the system it can cause issues? i had a hks ssqv fitted to mine for a short amount of time but did int have the hose blocked, i found my car stalling etc, and when i took it off and replaced it with the stock one i found my car running very rich and miss firing alot untill the ecu reset y was that

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...