Jump to content
SAU Community

Recommended Posts

Let's start from the very beginning......

2002 BNR34 VSpec II NUR purchased from Zele International in Japan through Powerplay Imports. It was delivered over two years ago. The car was in 5A condition; unmodified except for alarm system; and with less than 8000kms mileage.

Original photos taken at the Zele dealership:

gtr34289a.jpg

gtr34289b.jpg

gtr34289e.jpg

gtr34289d.jpg

gtr34289c.jpg

I decided to pay a premium for the NUR due to its exclusivity (bragging rights); collectable potential and car value retention. At that time, there were only 2-3 known examples of NURs in Australia. My original intention was to keep it stock and original NUR spec; as you will see that idea of keeping it stock was very short lived....

In hindsight, I should have saved the extra dough and bought a VSpec II locally instead. The whole importation process proved to be way too drawn out and involved lots of little hidden costs.

  • Like 2

Frankly the R34 GTR in stock trim is disappointing, even in NUR spec with N1 turbos. The boost is far too conservative to bring the best out of the RB engine.

The ride height is too high and gives the car an awkward stance. The wheels are too inset and tyres are too skinny to fill those lovely wide arches.

Plans were soon set in motion to improve on these shortcomings:

Performance:

Racepace Stage ONE modifications were chosen, consisting of:

Apexi Power FC tuned by the maestro - Ben

Racepace adjustable Cam gears

Racepace spec Exedy heavy duty clutch

Racepace custom 3.5" exhaust and front pipe

HKS strengthened actuators

K&N high flow panel filter in stock air box

This combo yielded just over 315rwKw safely with stock engine internals; injectors; cams and fuel pump.

Just a note of interest - I found choosing the 'right' exhaust the most difficult, simply because there are so many choices available. I seriously considered two other JDM options before settling down for the Racepace one, they were:

Mines Silence Vx Pro Titan II

Nismo Weldina NE-1 - twin front pipe with twin high flow catalytic converters and NE-1 logo laser etched on the gorgeous 115mm single SS outlet. You see how lovingly I am describing this exhaust - I liked it so much that I actually BOUGHT one as well from Yahoo Japan since they were of of production.

I can feel you guys are giving me the 'don't BS me' kind of look, well check out the pics:

dscf0014nq0.jpg

dscf0030pq5.jpg

dscf0025rh9.jpg

dscf0019wm5.jpg

HOWEVER, I never ended up fitting the exhaust, because Ben said very bluntly that I would instantly lose at least 30rwKw. Why was he so certain? Because he has played around with all the major JDM exhaust. So, I sold it to a US buyer on this forum and never recovered the original purchase price. The lesson learnt - never buy anything unless Ben is consulted!

Suspension:

Street orientated Nismo S Tune coilovers;

Spring rate: Fr 6.7/ Rr 6.0

Lower stance: Fr -30/ Rr -20

You can just catch a glimpse of the front external oil reservoir

13971596.jpg

Wheels & Tyres:

Rays CE28N 19"X10.5" +22 in gunmetal grey

Hankook Ventus K107 275/30R19

wheelb.jpg

How she looked:

Front suspension is raised due to uneven ground

46768805.jpg

95779190.jpg

Racepace exhaust looks stock from the rear and sounds quiet, therefore no hassles from the traffic coppers. Yet its very high flow!

98427524.jpg

79821726.jpg

Racepace sticker on the rear windscreen gives an extra 5rwKw

67291076.jpg

Stay tuned as the evolution continues......

Picture of Racepace stage one exhaust as requested. This may look like any garden variety aftermarket exhaust, but there are lots of hidden sneaky tricks to make the turbos spool hard and fast.

dsc01153u.jpg

dsc01154t.jpg

dsc01155a.jpg

dsc01156l.jpg

This exhaust gives superb high flow without the drone or high decibel common with the JDM varieties. The noise is cool at first, but after a while it gets annoying or until you get defected! Believe me, I have been there and done that with previous rides.

JDM exhausts are undoubtedly well fabricated and aesthetically superior in term of tip design, bore size and fancy burnt titanium finishes, but the rule of thumb is that a high flowing JDM exhaust is invariably noisy and a quiet JDM exhaust is invariably restrictive. That is the reason why Racepace decided to carry out their own R&D and designed their stage one exhaust to address this issue of flow vs noise emission.

  • Like 1

The NUR is without a doubt the finest Skyline I've ever driven. It was at about the same stage as yours at 'stage 1' wielding a bit over 300awkws. I understand why you're doing more though, cause even at that power it felt like the engine had so much more to give... Then I got called a pussy cause apparently 100% throttle throw wasn't pushing it enough :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...