Jump to content
SAU Community

Recommended Posts

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

To be honest the NRMA sh!ts me more than the price rise.

Every public holiday its the same crap coming out from them. We love the drivers we love consumers, yet they'll happily bend you over and jamb 3 bricks sideways up your ar$e when telling you it's justified to insure your $15k import for $4k a year.

Farking clowns, the government doesn't give a crap about the NRMA, and they have not achieved a sinlge price reduction in fuel even though they've been crapping on about this for decades!

Sorry - I just find it a bit rich for an insurance company to be going on about consumer protection/rif offs.

Pot

Kettle

Black

?

Can't wait for the banks to start telling us the NRMA is ripping customer off.

To be honest the NRMA sh!ts me more than the price rise.

Every public holiday its the same crap coming out from them. We love the drivers we love consumers, yet they'll happily bend you over and jamb 3 bricks sideways up your ar$e when telling you it's justified to insure your $15k import for $4k a year.

Farking clowns, the government doesn't give a crap about the NRMA, and they have not achieved a sinlge price reduction in fuel even though they've been crapping on about this for decades!

Sorry - I just find it a bit rich for an insurance company to be going on about consumer protection/rif offs.PotKettleBlack?

Can't wait for the banks to start telling us the NRMA is ripping customer off.

How absolutely on the nail, I think they compete with the RACQ in the race to se who can jam thier tongues up the collective govt asses fastest and the spokesperson always seems to be a tweedy bearded clown to whom article 303 should be applied immediatly. :(

:mad: And whilst off topic, but on motor fluids--I just changed engine oil and filter 5LT Nulon 10/40 full syn (4.1 used)=$58.95. gearbox 5lt Penrite SIN 75 (4lt used) $111.98 and Diff 2lt Castrol SAF XA (1.6lt used)$58.96.

Thats a total of 12ltrs of fluids at a cost of $228.91 = $19.0758c per litre with wastage of 2.3litres thus rendering a real cost of $23.598c per litre.

And fark me I forgot to include the $10.00 for the Nissan oil filter :cool:

If anyone wants the left over bits (1lt nulon 10 40 sin Hi flow. 1lt penrite sin 75. 1/2LT Castrol SAF XE). you can have them if you want to pick them up, I'm in Labrador but best PM quickly before I slap them on Fleebay and make my fortune.

FFFFFFFFFFFFFFFFFFaaaaaaaaaaarrrrrrrrrrrkit :)

Edited by BASHO
Every public holiday its the same crap coming out from them. We love the drivers we love consumers, yet they'll happily bend you over and jamb 3 bricks sideways up your ar$e when telling you it's justified to insure your $15k import for $4k a year.

They love "drivers", in a very narrow context.

If you're some middle aged person in a family sedan and buys in to the Current Affair attitude towards modified car drivers, they're awesome. Their lobbying is geared that way, as is their insurance, as is their roadside assistance.

Look at all the deals they offer as a part of membership. They're basically for old farts (who may or may not have kids) going on some road trip.

I'm a NRMA Roadside Assistance member for one of my cars, and so I get their magazine. The people who write in to it are, for the most part, the kind of people who'd consider the Bob Jane All Rounder to be a good tyre.

Must have not being paying much attention as I haven't noticed much change to the price of RON 98 around my area. Ever time I fill up its always between 1.28 to 1.35 (take another 4c of that for the discount card thing).

But I do remember years (10years+) back when my parents & family friends went to Monkey Mia, the price of RON 91 were 90c & they were saying how expensive it was compared to Perth (which was between 55c to 70c... now if any station had any of those prices today I would be paying them a visit with not only my car but also several large gallon drums :P

i love how so many people complain about the price of fuel yet a large amount of people will buy bottled water. fuel companies are probably making less profit from a tank of fuel than the water companies do from a single bottle.

Not just water. You're forgetting:

Coke/Soft Drinks

Milk

Juice

Fresh Coffee

V/Red Bull etc

People buy all those things and pay anywhere up to $5 for 250ml!!!!!!!!!!!!!!

None of those things make your car run and with the exception of milk, none of them really need to be bought at all (can make your own juice at home and the others are just luxuries). If you want your car to run. Buy fuel. If you don't want to pay for fuel, don't own a car. But don't cry poor when you can pay $3.80 for 600ml of Coke.

I never even look at the price of fuel. I don't give a rats. I hold the lever until it clicks off, then I go in and tell them what pump number, swipe my card, key my pin, and leave.

  • 5 months later...

NRMA has done fark all...

Difference between ULP Vs 98 RON is now commonly 15c.

Perhaps you notice it's been worse?

N.R.M.A. = Nothing Really Matters Anymore :laugh:

...but should I be surprised?

I don't know why anyone thought the NRMA or the ACCC would do anything about the price gap? There all shit toothless tigers like the department of Fair Trade. They are all made by the government to create jobs. NRMA has no power.

On the water subject, bottled water in sydney in the shops is over $2.50/600ml and average is $3. so thats more than $4 a litre, i'd rather buy petrol..... and i'm not an indiginous australian either :)

  • 2 weeks later...

for some of the posts on page one, from a quick skim read was the AUD mentioned? if not, for those say why at $100 /barrel the price didn't drastically fall at the pump when it went to $30, that's because the AUD was massively strong and then piss weak... the 2 together kinda kept pace with each with regards to what you pay the pump, pretty simple really.

it's good and bad... aud helps stop the price getting really high at the pump when it's strong, but then doesn't help prices get cheap when oil drops, because 99%, aud will drop with it.

there's ZERO competition in petrol prices, they have no need for it. i wouldn't be surprised if they just though of prices off the top of their heads.

but that's never going to change, what can change is the tax on petrol.

considering at least half the cost of petrol is tax.

not quite half of the cost of petrol is tax. there is the 38c excise (or whatever it is), plus GST, so if fuel is $1.32 litre, then you are paying 50c in tax. if fuel goes up to $1.65 then there is only an extra 3c in tax.

but you have NO chance in hell of ever getting the tax on fuel drastically changed. and if you did, the government would only tax something else more in order to be able to still have the same amount of income, or they would make more things a users pays system to compensate for the loss of money.

Yeah I agree Scathing, the NRMA are no friends of grey import / modified car owners. Don't forget that they SUPPORT a lot of these ridiculous road laws.

^^^... which why MLCrisis & myself have been forced to work independently from so-called motoring associations,

i) to gather > compile > collate information and

ii) set up petitions (like thin edges of wedges) to gain leverage

I'm not deluded into thinking that there isn't a bumpy road ahead - sigh (sorry for the double negative).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even with the piston at TDC there was room for it to drop, but I don't think it can drop fully into the cylinder, the problem you have is that you need something pushing against the valve to hold it up so you have enough room to put the new stem seal on and the spring etc.  I used compressed air only because putting rope in the cylinder seemed a bit risky to me, I know people have done it countless times before like this. Overall it's a pain in the ass job. Honestly you'd probably be better off taking the head off because the risk of dropping something in the engine and the finicky-ness of it all is very stressful. If you are going to attempt it though i 10000% recommend a 36050 valve spring/keeper tool. I had both the traditional lever type and after doing 1 cylinder it was absolute pain to get those valve keepers in place, even with 2 people. That 36050 is amazing, you do have to push hard to get them in place but it works perfectly almost every time. Back to my actual issue I think my engine is just tired and old and the rings have gone bad. The comp numbers (cold, no oil) were: Cyl 1 -129psi Cyl 2 - 133psi Cyl 3 - 138psi Cyl 4 - 137psi Cyl 5 - 157psi Cyl 6 - 142psi   Cylinder 5 and 6 having the most carbon on them.
    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
×
×
  • Create New...