Jump to content
SAU Community

Recommended Posts

Grate write up from the event. I have been hanging to read all about it as I refuse to use Facebook and people only seem to talk on there, otherwise you wait months to watch it on DVD.

Do you think that not running any form of bov has caused the turbo failure? I know most people diss like them but a $50 part may prolong a $1500 part. I fitted one after my Garrett shit itself.

One thing that worries me doing a mainland trip is having something go wrong with the car. You can't carry a whole cars with of spares.

Keep it the good work.

well ADGP happened... theres a full write up of the drama's that i had along with pics on my website

http://www.smdrift.com.au/1/post/2012/06/adgp-round-2-wrap-up.html

after the box blew i went thrashing... not a single f**k was given

600780_10151048862472160_478648453_n.jpg

527711_238798996238104_408481056_n.jpg

I can't believe you blew up a 25 box, that mustn't happen every often? also what killed the turbo, just extended high temperatures cook the bearings/rear wheel?

Sucks to have two major things go like that, sounds like you have a blast either way though!

Edited by Rolls
  • 2 weeks later...

time for an update... first heres some pics and vids from calder.

in car of Ben purtel.. thought it was a good vid cause it really showed the speed of it all and the amount of smoke my car generates haha

38249040369330300058114.jpg

another shot with me and Andrew Constatine from Tas... this was during prac session sat morning before my turbo blew. chased him 3 times like this.. first time i tagged his rear bar and you can see my corner light is missing as a result haha

Update time: prepping for WTAC mainly.. that will be the next outing for the car. Diff is getting overhauled and new 4.3 gears. the New motor set up struggles a bit to turn 4.1's with sticky tyres which is why i blew 3rd probably. need an overhauled gearbox and then the motor is probably coming back out for a full check over also. fun times ahead.

i usually run 255/40/17's in Achillies ATR sports or Federal 595. for calder park i tried some of the new Achillies 123s in 265/35/18 pressures usually around the 25/30 psi mark but i actually had to run the 123s higher at 45 psi just to get a decent drift going.

the amount of grip and speed with the 123s is huuuuuuge!

VQ30 would be pretty cool though. But need a lot of attention to intake and exhaust manifolds. They are f**king mess.

Although VQ35 shit would bolt on and strokers, cams choice is abundant. With a really big 6-speed VQ35 gearbox.

It would be indestructable drivetrain. Not sure about the engien though.

You could get a VQ35 gearbox bolted up to RB, Simon. Won't be very difficult and that gearbox is huge. RB or JZ Getrag looks like small kitten near that monster.

Also + for better weight destribution with VQ30.

Edited by robots

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Stop looking at the garage floor, and turn the radio up a bit louder if there's any strange noises...
    • No. Turbo shuffle and surge/flutter are not the same thing. Specifically, on a GTR, turbo shuffle has a definite meaning. On a GTR, the twin turbos are assumed to be the same thing and to operate the same way, exactly. In reality, they do not. Their exhaust sides are fed and exhaust a little differently, to each other. Their inlet sides are fed and exhausted a little differently, to each other. Consequently, when they are "working" they are often at slightly different points on the compressor map compared to each other. What this means, particularly when coming on boost, is that one of them will spool up and start producing extra flow compared to the other, which will put back pressure on that other compressor, which will push the operating point on that other compressor up (vertically). This will generally result in it bumping up against the surge line on the map, but even if it doesn't, it upsets the compressor and you get this surging shuffle back and forth between them That is "turbo shuffle" on a GTR. It is related to other flutter effects heard on other turbo systems, but it is a particular feature of the somewhat crappy outlet piping arrangement on RB26s. There are plenty of mods that have been attempted with varying levels of success. People have ground out and/or welded more material into the twin turbo pipe to try to prevent it. Extending the divider inside it works, removing material doesn't. There are aftermarket replacement twin turbo pipes available, and these exist pretty mush purely because of this shuffle problem.
    • You can temporarily* use lock collars to keep it in place until you can do the bushes, back the nuts off, slide them in, snug back up. *temporarily is often for ever
    • Thanks for the quick reply. To be clear, when you say turbo shuffle do you mean turbo flutter "stustustu" or referring to something else? I had thought they were the same thing. When I wrote the post my intention was to say it wasn't a flutter/compression surge sound. My understanding was that a flutter sound would be occurring when throttle is released, whereas I can keep the throttle in the same position for this noise
×
×
  • Create New...