Jump to content
SAU Community

Recommended Posts

was it a p-plater? with one of their back round lights not working?! i spotted him on castle hill rd at that intersection on saturday.. i tried to tell him, but the girl in the passenger seat had her window up!

also spotted RUFGTR on newlone rd on sunday at midday :)

was it a p-plater? with one of their back round lights not working?!  i spotted him on castle hill rd at that intersection on saturday.. i tried to tell him, but the girl in the passenger seat had her window up!

also spotted RUFGTR on newlone rd on sunday at midday :D

I think it was a p plater. Was parked though. Had rims and looked lowered.

Saw a silver S2 GTST on Pennant Hills Road around 6.45AM this morning. Exchanged thumbs ups :thumbup:

Also saw a gold R33 with no spoiler turning onto North Rocks Road from Pennant Hills Road at approx 3:20PM

Spotted AIVIOL heading East on GWH at Blaxland yesterday, chatted to him through the 40 zone! Must say one of the nicest 4 door 32s I have seen.

Oh, and spotted Bonkers the other day... he was parked in his garage! :D :hehe:

"Spotted AIVIOL heading East on GWH at Blaxland yesterday, chatted to him through the 40 zone! Must say one of the nicest 4 door 32s I have seen."

Thanks for the nice comments Majanal !!!

Obviously i spotted Majanal in his 33 yesterday:)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...