Jump to content
SAU Community

Recommended Posts

spotted one white gts-t with 400r kit outside love machine in kings cross tonight, then another white gts-t series one with p plates on elizabeth street surry hills outside a brothel.

for privacy reasons i wont post the plates, jeez u skyline owners are horny bastards! this is also not the first time ive seen a skyline outside that brothel!

both were at about 1245am.

Edited by siksII
sif.. I live in east subs..

though havent really driven car around much lately.. only to and from work.. down and up anzac pde.

So thats what 2 people? lol.. inc me..

Thats so ghay.. i never see you.. altho im more round mascot/ pagewood.. what skyline you got..

Yesterday arvo saw a white 33 on wentworth ave heading towards mascot at about 5.37pm.. plates where ask*** something like that..

spotted one white gts-t with 400r kit outside love machine in kings cross tonight, then another white gts-t series one with p plates on elizabeth street surry hills outside a brothel.

for privacy reasons i wont post the plates, jeez u skyline owners are horny bastards! this is also not the first time ive seen a skyline outside that brothel!

both were at about 1245am.

who cares about the plates, just post of the address so we can tell others not to come to these places :wink:

what i want to know is what YOU'RE doing there arup! :cheers:

and spotted a white 33 on the m2 this morning!! i looked over and smiled.. the guy just looked straight ahead! i then blocked him in traffic further enough cause he wasn't quick enough to change lanes! LOL!

Sorry!!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...