Jump to content
SAU Community

Recommended Posts

Fri arvo?

Spotted by SW20 again? You must be too stealthy!

Not long after that I spotted a 4 skyline convoy (had one black 34GTT) and another trailing 34GTT with P plates going west on victoria rd between powerplay and the gladesville bridge. Someone honked as they pass me but i was stuck behind a Tourak tractor and didn't react fast enough after seeing the first skyline! I pressed my horn late too but it didn't work. AAnyone know where to get a spare horn button? Mine's smashed mine to bits honking someone.

T

Yep, the black Honda Accor Euro is Stealth++

also JR34GT yellow R34 GTT with the Nissan Aero kit on Lane Cove Rd near the Comenarra Parkway

i think i might work with whoever owns that car, its parked outside my work everyday, but i have no idea who owns it.

Spotted CYIFLY near Auburn?

MARSS in George Street.

A Gold/Yellow R33 with a black wing wearing a SAU sticker on the quatre panel going through Chittaway.

A few grey R32's in the city. One pssching past a nice WRX.

Blacktown @ Midnight (Near Blacktown Hospo)

Black r32 GTS-T Sexy with bov.. not sure on numberplate

White r33 GTS-T White with bov.. RB-1337 Red Plates

Silver r33 GTS-T Tried to race us lol... 4KRUZIN

4kruzn was on a commonwhore with air bags

(glad i didnt buy it)

did CYIFLY used be on a green sprinter like 10yrs ago.

OFD-14L do you come on here?

Spotted TRD-33Y on cleveland street around 7ish on saturday, damn that traffic was bad.

Spotted TURBOS at double bay around 1.30am sunday with a ridiculously loud exhuast.

and two girls in a grey R32 GTST on cleveland street 2.30am ish dancing and singing in the car.

BTW, I was in a white R32 GTR ATI-33A

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...