Jump to content
SAU Community

Recommended Posts

Spotted a silver r33 crossing over epping rd with SAU sticker on the rear quater window

Possibly me! Intersection of Epping Road and Centennial Avenue? Was on my way to pick up a new Nismo knob! :D

MSP-25T & DHC on Victoria Rd about 15 mins ago :laugh:

hahaha dammit tosh I didnt see ya....

BUT I did spot mass near the Millers self storage on vic rd...Gladesville.

You see mass as well ??

Funny thing is....she saw you and I didnt but I saw mass and she completley missed him. >_<

hahaha.. i know!!! how weird is that thomas!!!!

and tosh.. sif have a ute with plates R34 GTR >_<

and can't believe you saw us on the anzac bridge!!!! dave would have been behind me! and ms would have been chasing greg down on his sexy honda cbr!! :drool:

Yesturday evening - spotted a maroon 33 gtst and a black 32 gtst on pacific highway near the servo's at berowra - heading north, gave a toot and a wave, got a wave back

spotted exh-45t stuck in traffic bout 6:15, i was going opposite direction.... gave a half wave! got full one back! Champion

Neat looking car!

Yah that was me :P

Thanks mate.. yours looking great too! I didnt catch your plates in time!

Also saw SHRUGZ (Wine Red R33 S2) and HUH-000 (White R33 S2) --- Waved, but nothing in return :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...