Jump to content
SAU Community

Recommended Posts

Spotted a black/gunmetal R32 GTR at Westpoint Blacktown tonight when I went to the upstairs cinema/bowling/food court area for a bite to eat.

Then saw and followed a white sII R33 turning off Sunnyholt Road into Main Street heading towards the Great Western Highway, and passed a black sI R33 parked outside the Car Audio Excellence sale just opposite Blacktown Hospital...

the white R33, Had Advan racing wheels on it (Red)..?

the white R33, Had Advan racing wheels on it (Red)..?

Could have been, but I can't remember now... I followed it from behind the Workers' Club (near the BlockBuster Video) on Flushcombe Rd, then onto Newton Rd, then onto Main Street. I turned off at Wall Park Avenue.

Spotted black 32 gtr wsid wednesday, ran a 12.5

silver 33 gtst and a white 32 gtst.

Spotted chick in a silver r33 gtst sat lunchtime on great western playing with wrx and me.

Spotted two r33 gtst skylines heading penrith way on great western couple of hours ago and a lone black r33 gtst at st marys traffic lights.

To the fkwit in the white R33 Series 2 on the m4 westbound near the speed cameras two hours ago - don't slow down to 40km trying to talk to friends in other cars you dick.

And they're FOG lights, not driving lights.. >_<

spotted a blue r32 gtr on my way to work thismorning.. very nice

spotted a stockish blue gtr again in chatwood way tonight, awd bastard

and THIS in bondi, photo01350uj.jpg

hard to see but totally cool r32

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...