Jump to content
SAU Community

Recommended Posts

you missed out on a cutie!!! :D

Pics?

oh and spotted steve.....rather he spotted me on vic rd today around 12ish just down the road from Powerplay.

Yeah, and not even with my GTR ;)

thats strange I saw ando's purple ceffie at Grey Imports on Friday!

I also saw that "car" :)

I've been either seeing (from a distance) or hearing this car just about every weekday now for about 3 weeks, usually around 5.45pm. Still wondering who it is, because by the time I get out the door to see it, it's gone...

OK, I've FINALLY spotted the number plates - it's GTR-10S. Once again, right around 5.45pm.

spotted 2 R32s in the servo across from Livo KK, with a Silvia which had leaked all the engine oil

from the oil fillter i think one of them said,

one of the R32s had a nice purple/pinkyish paint jop and caramel/creamy leather interior very nice..

about 11 last night,

Spotted a black 33 on anzac pde cross of high street, it was involved in an accident, side/head on with another car. :)

Plates were standard ones starting with A. If you're on here hows the car?

RAIN + WET = DRIVE THE F SLOWLY! DONT TAKE CHANCES!

forgot to post this earlier!! pretty sure i saw jerry (wrxhoon) the other night parked on that road that runs parallel to pennant hills road!! it was a white 34 gtr.. and the quick glance i got at the driver, looked like jerry! :)

That road wouldn't be Oaks road mona? Near the M2 tunnel? It was dark and i didn't see you, what kind of car was you driving?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...