Jump to content
SAU Community

Recommended Posts

Spotted: white 33 GT-R on Mowbray Rd in Artarmon at Midnight just gone. Whole bunch of SAU NSW members surrounding the car and drooling after the Great Northern Hotel closed and we had nothing better to do :laugh:

Spotted: white 33 GT-R on Mowbray Rd in Artarmon at Midnight just gone. Whole bunch of SAU NSW members surrounding the car and drooling after the Great Northern Hotel closed and we had nothing better to do :P

you left out the bit about someone humping the back of the car while it was waiting at the lights...!!! Dunno who it was but loved the look on the faces of the other drivers behind - hahahahahahaha!!!

spotted a bright purple 34 GTR yesterday on the F3 exit at Gosford... nice power play imports sticker on the rear window..... absolutly beautiful car !!! :P

Was it like a harlequin colour with Gold wheels on it?

Was it like a harlequin colour with Gold wheels on it?

Yeah, a brillant purple in the sun...I'm pretty sure it had gold wheels too. Pulled over on the side of the road with 3 other cars, an Audi & others. I drove past with the thumbs up, but the driver was busy. Hot ride !!!

spotted a do luck r33 GTR, midnight purple 33GTR, yellow vspec r34 GTR, lotus elise, holden statesman and a heap of BMWs and my car on the Bathurst to wisemans cruise yesterday. You guys should of been there, great pace and variety!!

spotted alot of lines last night the only one i can remeber was a whit 32 with black bonnet at thornleigh maccas number plate was oska or something.

Yeah plate would have been Osaka... Seen him around a few times. he's been on some SAU cruises too.

Yeah plate would have been Osaka... Seen him around a few times. he's been on some SAU cruises too.

yeah thats the plate. the car sound a little rough but mabye thats cos of his running gear or somthing

Spotted a custom purple 32 with an absolutely gorgeous girl driving it at the 7 11 in Mt Druitt today, are you on here at all? thats an awesome paintjob you have their.

Also spotted a gunmetal 32 dumped on stockies in Mt Druitt that looked basically identical to mine.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...