Jump to content
SAU Community

Recommended Posts

Spotted LOZ*** pac hwy turramurra - blonde chick driving

Also spotted a maroon 33 with powerplay stickers in Artarmon...gave a toot but I was in 31 and got either a death stare or a wtf stare lol

Turbo Brian, its call traction control lol Wasnt me tho.

Spotted myself testing out a BOV (atmo) on my R34.. I dont know how anyone could use one. Will be making a plumb back head for it.

At least it was cheap!

Spotted a silver R33 in the tunnel on the Eastern Dist on Friday morning. Plates were A**-91E I think.

Then saw a black R34 GTT in the carpark behind the shops in Mascot on Botany Rd. Clean looking, I think it was an Asian guy driving?

And lastly saw a white R32 for just a second on the Cumberland Highway this arvo at about 3pm.

lol place I was yesterday had 4x 32gtrs, and not a single one was running. I'm beginning to think its normal

:(

I aint going anywhere near there then!!

Unfortunately they were all working (including Steveo's) and could make an escape before I could make some money out of em ... :blink:

ok last night on old windsor rd i think i spotted a grey R33 with plates MT***. i think there was another one with blue stickers on the bonnet but can't remember?

Today on windsor rd i spotted a red R33, i let you change lanes, i was in the excel :thumbsup:

and there's a gunmetal 33 out the front of my work building at norwest with chromes..anyone here?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...