Jump to content
SAU Community

Recommended Posts

Spotted Terry's Blue R34 GTR this morning at Springwood on my way home from work this morning. Didn't get a chance to wave, popped out from behind a car going up the hill in the Stag. Very nice mate, very nice.:thumbsup:

Edited by Daleo

Might have seen that one too.. Or you? Plates beginning BTO? On Wentworth Ave in Mascot

I tend to see a white 33 GTST, a few gunmetal R32's & 1 33 as well as a black 34 & V35 most days whilst at work around that area too.

black r32 GTR on parra road heading west from broadway to at least norton st, driving super slow.

CTC 247 1129 am sweet looking ride, some young asian dude driving it, probably sydney uni student.

oh and rb25PWR no fair your on the road ALL day as HWP, surprised u dont spot a dozen a shift, and will u 'spot' the ones u defect/book? :P

Edited by hamiltonau

Might be me in the white 33 GTST, are you usually in your GTR?

Not very often, been catching the train for the last month or taking the better halves big black territory

Spotted RR33GT on newbridge road I ninja'd a few pics but can't upload direct from my phone :( I was in the piece of poo white n13 pulsar sedan with really dark windows

I've seen that around too, or one with similar plates on Bourke road.

Spotted a ford station wagon towing a massive trailer getting on the m5 at heathcote

6ish this morning? I had borrorowed Neil's foulcan to tow the race car down to the track day :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...