Jump to content
SAU Community

Recommended Posts

Spotted Terry's Blue R34 GTR this morning at Springwood on my way home from work this morning. Didn't get a chance to wave, popped out from behind a car going up the hill in the Stag. Very nice mate, very nice.:thumbsup:

Edited by Daleo

Might have seen that one too.. Or you? Plates beginning BTO? On Wentworth Ave in Mascot

I tend to see a white 33 GTST, a few gunmetal R32's & 1 33 as well as a black 34 & V35 most days whilst at work around that area too.

black r32 GTR on parra road heading west from broadway to at least norton st, driving super slow.

CTC 247 1129 am sweet looking ride, some young asian dude driving it, probably sydney uni student.

oh and rb25PWR no fair your on the road ALL day as HWP, surprised u dont spot a dozen a shift, and will u 'spot' the ones u defect/book? :P

Edited by hamiltonau

Might be me in the white 33 GTST, are you usually in your GTR?

Not very often, been catching the train for the last month or taking the better halves big black territory

Spotted RR33GT on newbridge road I ninja'd a few pics but can't upload direct from my phone :( I was in the piece of poo white n13 pulsar sedan with really dark windows

I've seen that around too, or one with similar plates on Bourke road.

Spotted a ford station wagon towing a massive trailer getting on the m5 at heathcote

6ish this morning? I had borrorowed Neil's foulcan to tow the race car down to the track day :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...