Jump to content
SAU Community

Recommended Posts

Spotted a nice clean Black R33 GTST with 400R Bar and sideskirts going down Lane Cove Road after work yesterday. Looked like gold center rims with silver rim - GTC's?

I would have waved but was in the stealthy Mazda 3.

^ did it have stock wheels? that would of been my mate he was there around that time, mint car !

spotted an r32 gtr RUGAME, drove next to him briefly at sylvania around 6:30 tonight

yeh it hand standard wheels standard height

Spotted a nice clean Black R33 GTST with 400R Bar and sideskirts going down Lane Cove Road after work yesterday. Looked like gold center rims with silver rim - GTC's?

I would have waved but was in the stealthy Mazda 3.

I went past a 3 yesterday @ top ride shopping center. loud as f**k, turned right at the lights near the civic center. Looked good.... for a 3....

This yours?

Naw, our three is bone stock. Only mod I'm allowed to make to it is to change the steel stocker wheels for mags when the tyres wear out.

There is also some R33 GTR in black that works in the Hyundai bldg in N. Ryde. I've given him a wave - even in my GTR but pays no attention or maybe He thinks I'm gay trying to pick up on him or som'n. lol

Spotted BK1990 looking for a parking spot at La Perouse on Monday! Around 2-3pm. Nice neat looking 34R mate!

haha thanks mate fluked one down the bottom after 3 times going around and around haha .Saw a white 33 gtr on the m4 about 2pm today heading blacktown way .

spotted a r34 gtt turning on to the m4 around midday yesterday ,another 34 gtt think it was midnight purple from far on cumberland highway around 2pm yesterday and a r34 gtfour at subway bass hill around 12 this morning

Spotted a r32 GTR in Narellan , turning into the mall at lights. Purple like paint , exaust , standard looking with GTR 32x something plate .

Parked next to us at the lights , first heard the unmistakable sound of the rb26.

Good to see , hot car mate

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...