Jump to content
SAU Community

Recommended Posts

pfft mr2s are too gh3y to mention, if I was going to include non-skylines I'd have to include the 350z with the smoking brakes that went off the scale on the pyrometer......2 laps at a time can be tough.....

eh, close nuf... i saw it sitting outside like every morning for about 2 weeks.. nuthing suss is it? nice car. thank you very much for placin it there for my viewing pleasure. good while it lasted

nuthin suss, I run the panelshop in between honda and storage king just spent 4 months rebuilding her inside and out. she is getting a new clutch at the moment plus a few other things done, give it a week or so and your veiwing pleasure (and my baby) will be back she belongs.

nuthin suss, I run the panelshop in between honda and storage king just spent 4 months rebuilding her inside and out. she is getting a new clutch at the moment plus a few other things done, give it a week or so and your veiwing pleasure (and my baby) will be back she belongs.

Ah, here he is. I had a feeling you would get on here to check out the thread Marty

I will be popping down during the week with the MR2 mate.

Nick

spotted a few r32s and r33s at Macquarie on saturday, all standard plates :(

and also spotted a r32 with UAS sticker on the back and QLD plates going down windsor rd on saturday around 6:30 or 7pm

Ah, here he is. I had a feeling you would get on here to check out the thread Marty

I will be popping down during the week with the MR2 mate.

Nick

had to check it out after what you said yesterday

yeah bring the car in when you get the chance and I,ll look after it

its good to see someone who takes pride in their ride (or rides)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...