Jump to content
SAU Community

Recommended Posts

I have a pretty general question about tires, currently my stag is running a set of 215 x 55 Bridgestones on the stock 7j 17" rims, the tires have quite a few screws stuck in them and they make a pretty crap noise when cornering . I have a full set of wet weather TOYO tires that were fitted to my track car, I think these will go really well on the stag. Problem is that the tires are 215 x 40 profile, I was wondering what affect going from 55 to 40 profile will have on my speedo?

Doable or not?

Link to comment
https://www.sau.com.au/forums/topic/292582-m35-tire-profiles/
Share on other sites

Thanks guys, so if i do this my wheels will be spinning 10.7% faster, so if my speedo says I'm doing 100Kph I'd actually be doing 89Km/hr not including the standard factory over read of about 7Kph.

Maybe I'll give it a miss, don't want to be the slowest thing on the highway!

I find the standard speedo is out by nearly 8km at 100km/h already...wouldn't want to make it worse...

one thing to make sure is that the front and back tyres are all the same diameter & width etc. The AWD system does allow for a minimal difference (ie. to account for uneven tyre wear) but if the difference is too great it will play up.

I'd put them on. Car will handle better. You just need to go by one of those displays at the side of the road that says how fast you are going and then you can calculate what your speedo should read to be doing 109km/hr on the motorway - there's no way you can pull max revs in top gear anyway so your real maximum speed will probably increase (or it would do if you didn't have the 180km/hr speed cut).

You can get a kit from Jaycar to correct your speedo if you need.

one thing to make sure is that the front and back tyres are all the same diameter & width etc. The AWD system does allow for a minimal difference (ie. to account for uneven tyre wear) but if the difference is too great it will play up.

LOL my stag is RWD only bud. Keeps me bright eyed and bushy tailed on wet mornings :)

Cheers for the info Kiwi, might check out Jaycar.

  • 3 weeks later...
might check out Jaycar.

Let me know how you get on with a Jaycar kit if you go that route, I'm keen to recalibrate my speedo also. It seems to read 6-7km/h under at 100km/h. It wouldn't be too bad, but the factory cruise control only goes up to 110km/h, which means 103km/h real, and that sucks :)

VQ25DD,RWD, RX, cruise, navi, HID, but only 16" wheels (wacky size too - 205-65-16)

I have a pretty general question about tires, currently my stag is running a set of 215 x 55 Bridgestones on the stock 7j 17" rims, the tires have quite a few screws stuck in them and they make a pretty crap noise when cornering . I have a full set of wet weather TOYO tires that were fitted to my track car, I think these will go really well on the stag. Problem is that the tires are 215 x 40 profile, I was wondering what affect going from 55 to 40 profile will have on my speedo?

Doable or not?

http://www.1010tires.com/tiresizecalculator.asp

Just remember to keep it under or over 3% variance

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...