Jump to content
SAU Community

Off To Japan For A Couple Of Weeks.....any Tips?


Recommended Posts

Hey ppl,

I'm off to Japan in a couple of weeks and I was just wanting to know who's been there before and whats worth checking out given the time frames I have to work with.

I'll be in Osaka for 4 days, Hakuba for 5 and Tokyo for 7.

Let me know where you've been (good or bad). Any advice would be much appreciated.

Cheers,

Steve

When are you going?

There is the Tokyo Auto Salon in Jan. Around the 10th i think from memory.

15th - 17th of Jan which is when I'll be over there.

My two weeks in Japan on JDMST, post 60 onwards: http://forum.jdmstyletuning.com/showthread...1573&page=3

You'll need to sign up to read it.

Make sure you have a JR pass for the two weeks, I used mine a freaking lot!

Don't stress about train systems, the private ones just get the cheapest ticket and pay the difference at the other end if you need to.

Also, if you are changing lines at a private station (metro etc) then make sure you dont put your ticket in an orange labeled machine (it will take it thinking you are leaving the station)

Pre book your shinkansen seats a day or two in advance so you can get a train at a decent time, however if you get on at a station at the start of the trip you can usually get a seat in a non reserved carriage.

Not all toilets in regional areas have western toilet bowls (makes an interesting event in the dunny)

Make sure you know what you want to do the day before hand, and dont be suprised if you cannot find the thing you are looking for.

People in Tokyo may say they dont speak english but a lot understand a little.

Try to work out the kanji for beed, pork, chicken, tempura, prawn etc. It helps a lot in restaurants!!!!!

Hope your single, the girls in Tokyo are f**king HAWTTTTT!

If you want to do car stuff try to get onto someone who is hooked up before you go, unless you speak the language and get a chance to stop and talk to someone who looks in the know you may be shit out of luck.

Dont be concearned with the feeling of xenophibia on the trains, Japanese dont really like having a whitie in their personal space. In restaurants they are fine serving you etc, but other than that I noticed a fair bit of racism. End of the day its their country, irony is the obsession with western culture :P

Tokyo for me was very different to the rest of the country, but Im not sure about Osaka.

Any other questions PM me.

OH and dont expect to see alot of jap performance cars around.

You will see millions of taxis, little cars like micra, and european cars.

Most of the jap performance i was was out of the cities.

And...If you like Anime check out the Ghibli museum, freaking amazing!

hm ok well as it appears your all going over there, who wants yo find me a low mount t67 kit for my rb25???? :P

From trust? No such thing, T67 comes in kits SR20 only. Can buy it separate and make a manifold, doubt it will fit, the comp cover is as big if not bigger than to T04S comp cover that comes with the GT30/35 series turbos from garrett. I managed to get a GT30 to just fit on mine, but I decided it was too close and went high mount.

Off topic sorry :D

I have only ever found 1 low mount manifold which was on ebay from jps trading on ebay....sadly before i bought it the person I told about it bought it instead....then on sold it...and it wasnt to me no doubt for much more than the cheap price it was purchased for. The t67 I'm pretty sure did fit on it.

Thems the breaks though.

Still on the hunt for the same manifold...which I doubt ill ever find :P

more off topic...sorry

a mate and i will be over there from the 6th of jan to the 27th of jan!

Tokyo Autosalon FTW!

who else will be over there... Wheezy, i think i;d like to hear more of your tips as this is my first time overseas and i feel it might be a bit of a shock when i get there.

I was there in oct last year... had a absolute ball...

Tokyo - It's pretty overwhelming at first, just try and fully immerse yourself in the culture of it.. I regret not doing that, the girl I went with was too scared do so and buggered up that part of the trip.

If you get the chance go to Kyoto there are soooo many beautiful temples there and maybe try and take a day trip to Nara, where the biggest wooden temple in the world is and HEAP of cute little deers who will turn nasty and ear your clothes once you run out of biscuits to give them.

Golden Pavillion is a must see. And you might spot a few geishas down the back streets of Kyoto if your lucky. There were plenty of other "ladies of the night" there done up to the max to entertain the business men.

I hardly saw any modified cars around, I got excited every time I did see a skyline.

If you go to Harajuku make sure you go on the weekends. Thats when all the Harajuku girls are out.

I didn't find the Japanese racist at all. Some got a little irritated trying to explain things to me because I couldn't understand but in general I found them most accommodating and patient. it pays to know a few Japanese words, especially "thank you" and "excuse me". I think I used those the most.

Otherwise just go with no expectations and it will totally blow your mind! and the girls over there are STUNNING and so fashionable.

Have a awesome time!

If you want to pick up some handy relevant Japanese easily try this -

http://www.earwormslearning.com/intro.html

http://www.earwormslearning.com/pdf/Booklet_Japanese.pdf

I've been using it and I find it works really well, I've remembered heaps of stuff and I'm pretty stupid :nyaanyaa:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...