Jump to content
SAU Community

Recommended Posts

Hey guys,

I got a rough estimate for how much tuning is going to cost me. I was quoted that it would take about 7-8 hours @ 140/hr to tune my car. I have a Microtech LT12S with Sard 850cc injectors. The ecu already has a base map. Do you think this is a bit much? What ECU do you have, where did you get it tuned and how much did it cost for the tune? Cheers

Also just in case this comes up I am in Townsville. So anyone reading this from north QLD PLEASE help out. I would like info from other people too not just north QLD people

Mods: If this is already a thread I am sorry and please point me in the right direction.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/298279-cost-of-a-tune/
Share on other sites

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

i was charged $1200 for a full tune and installation of my HKS Fcon Pro ecu, was meant to be around the $1k mark but then had to change to colder plugs and we had alot of screwing around with other components affecting the tune so paid him some more for labour but overall im happy with wat i got in the end. this is as BD4's by the way. Tunehouse now also tune HKS ecu's as well :P

Link to comment
https://www.sau.com.au/forums/topic/298279-cost-of-a-tune/#findComment-4962392
Share on other sites

Hey guys,

I got a rough estimate for how much tuning is going to cost me. I was quoted that it would take about 7-8 hours @ 140/hr to tune my car. I have a Microtech LT12S with Sard 850cc injectors. The ecu already has a base map. Do you think this is a bit much? What ECU do you have, where did you get it tuned and how much did it cost for the tune? Cheers

Also just in case this comes up I am in Townsville. So anyone reading this from north QLD PLEASE help out. I would like info from other people too not just north QLD people

Mods: If this is already a thread I am sorry and please point me in the right direction.

Cheers

Haha it's really getting to you isn't it :nyaanyaa:

Link to comment
https://www.sau.com.au/forums/topic/298279-cost-of-a-tune/#findComment-4962949
Share on other sites

Hey guys,

I got a rough estimate for how much tuning is going to cost me. I was quoted that it would take about 7-8 hours @ 140/hr to tune my car. I have a Microtech LT12S with Sard 850cc injectors. The ecu already has a base map. Do you think this is a bit much? What ECU do you have, where did you get it tuned and how much did it cost for the tune? Cheers

Also just in case this comes up I am in Townsville. So anyone reading this from north QLD PLEASE help out. I would like info from other people too not just north QLD people

Mods: If this is already a thread I am sorry and please point me in the right direction.

Cheers

I live in mackay. I can pull 300rwkw, and good road use, not just a full power tune, out of a properly set up car with a power FC or Vipec in just under 3 hours. This is obviously when someone brings me the car with all the things I have asked for sorted (New fuel pump, removed After market FPR, new plugs and coil packs if needed, and any other things sorted to support that power.)

Microtech ECUs are absolutely shithouse to tune I might add, and they are not something to want to have anyway, as you're going to have the car back every 3 months needing a retune, for a significant amount of money. If I were you, I'd sell it, get a Vipec or Power FC, and get a decent tune in it.

You're more than welcome to travel to me if you want a tune - But I will not tune a microtech. I simply don't like them.

Also, I tune cars for love, not money. I only charge to maintain my gear and buy extra stuff that will help the next tune - Not to run a workshop, or take money from someone.

not everytime someones charges you lots of money its going to be a good tune, just make sure your going somewhere your not being roughted.

Exactly right, seen this many times.

PFC tuned at Autotech (Southport, Gold Coast). Cost me close to 1k for installation of pfc and boost controller kit, 4wd dyno tune at $220 per hour.

Was the $1k installation AND the powerfc, or just the installation costs? It took me 45 mins to install a PowerFC D Jetro and boost controller kit into someones car one day.

Link to comment
https://www.sau.com.au/forums/topic/298279-cost-of-a-tune/#findComment-4962958
Share on other sites

Was the $1k installation AND the powerfc, or just the installation costs? It took me 45 mins to install a PowerFC D Jetro and boost controller kit into someones car one day.

Sorry for the confusion. Its close to 1k all up and that includes the installation of pfc and boost controller kit with a 4wd dyno tune. Probably 3-4hrs worth in tuning I remember.

Link to comment
https://www.sau.com.au/forums/topic/298279-cost-of-a-tune/#findComment-4963002
Share on other sites

The microtech's are avaerage ecu's but they are also the simplest and fastest to tune (playing the microtech, drag the line game). Average tune time for a microtech is far less than a pfc orhaltech etc.

Average cost would be $600-1000 no more. (for example on average we charge $600)

Edited by URAS
Link to comment
https://www.sau.com.au/forums/topic/298279-cost-of-a-tune/#findComment-4963108
Share on other sites

I can pull 300rwkw, and good road use, not just a full power tune, out of a properly set up car with a power FC or Vipec in just under 3 hours

Look that is all well and good... however...

Vipec/PFC both have pre-formatted maps with the cold start populated etc etc. All the important/hard to configure things - made much easier

Far as i know the Microtech requires this all to be done manually from virtual scratch and so on, which would take a considerably longer amount of time.

To do cold start is a pain in the ass from all reports.

Link to comment
https://www.sau.com.au/forums/topic/298279-cost-of-a-tune/#findComment-4963234
Share on other sites

My first tune ended up costing ~$3000 after losing the ringlands off two cylinders.

Wish I would of payed a bit more money and took it to someone more competent in the first place...

I have learnt 2 things about tunes; Will travel for a known good tuner, will pay $$$$ for a known good tuner.

Link to comment
https://www.sau.com.au/forums/topic/298279-cost-of-a-tune/#findComment-4963237
Share on other sites

My Microtech was tuned by CRD, and the tune on it is bloody abysmal (in fairness it was also taken there by the previous owner). 18L/100 fuel consumption, new plugs every 10k and have to start it 3 times when it's cold.

Out of interest, how much is it to 'clean' up a tune like that?

Link to comment
https://www.sau.com.au/forums/topic/298279-cost-of-a-tune/#findComment-4963268
Share on other sites

Haha it's really getting to you isn't it :(

Yes Phil it is getting to me you bastard. Im about to go round to the mechanics to have a talk to them now. That quote was from Aitkenvale auto and dyno. I understand good tunes cost money but Phil has been there and so has a couple of friends of his and apparently they charge too much and charge you for stuff they don't do or they do and don't do it properly. Like I said Im going in to see them now. They haven't called me back since last Tuesday and I have rang them every day to get the phone answering lady say "He's currently busy at the moment but he will call you back". I dont mind paying the money if I know that is how much time and effort they are actually putting into the car. I hate paying for rubbish. Ok Im ending this rant short or I will never get to the mechanics. Cheers!

Thanks for all the replys :O Also if anyone knows someone in Townsville that does mod plates I would also be interested. Will keep you posted with what the mechanic says......See how big my bill is......

Link to comment
https://www.sau.com.au/forums/topic/298279-cost-of-a-tune/#findComment-4963356
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
×
×
  • Create New...