Jump to content
SAU Community

Recommended Posts

SO here I am again, trying to decide what to buy for $15,000 this time.

I was thinking R34, manual, turbo as they are newer and just feel 'sturdier' than a R32 (no R33's thanks).

Look on carsales...hardly anything..and same with these forums.

I thought they were cheaper than that?

I guess I thought wrong :D

I could get a R32 GTR, but to find one in GREAT condition that hasn't been as pounded as Heather Hunter would be pretty hard.

R32 GTR...or R34??

R34 in white or black...hottt, especially with a 'mild' body kit.

someone help!

stagea? i picked up my rs4s for under that and its factory manual (r33 gtr gearbox and diffs) with the rb25 neo (r34 motor)

just keep an eye out for bargins and look at cars in the price range above yours (i.e. 20k) its amazing how much ppl will drop the price if they have to sell

Whatever you pick up...

December & January are the best months to pick up a bargain...

whether it be from 'private' or 'dealer'.

Notwithstanding that, you still need to do all your homework as you inspect - don't rush!

R34 GT-t sedan MIGHT be possible, otherwise you're dreaming if you want a decent manual coupe. Same with a decent R32 GT-R. If you want something in mint condition, get an R33.

If you want something decent, definitely stay away from an R32 GT-R with your price range. You may be lucky to get a clean exterior one, but more than likely motor will be shot, and there may be other problems, meaning, big $$$.

As others have said, for 15k you'd be better off looking at a 33. Or save for a bit longer and buy an R34 like you want

xmas spirit bitch.. time for giving lol

lol

Theres a schmick 5 spd GTT down the road from me at some compliance joint, they are asking 19. Finding a good one for 15 may be time consuming but not impossible.

32 GTR at 15k will be a turd. You're in a shit situation really because you're at the bottom end of the market with your budget. The only Skyline that you will find in decent condition for 15k will be an R33 which you don't want. If you haven't already, go out and drive an R33 and then decide. If you don't like the 33 keep saving for a 34 or 32.

i doubt you can get a r34 for $15,000 unless there was something wrong with it.

back in the day i bought my r33 for exactly $15,000 standard except the exhaust,always garaged pretty much mint condition not a scratch.

that was until i got caught in a hail storm :D

got any other cars for trade-in? best bet would be to go to a dealer and state you got 15k and that's it.. see if they take it or not.. i'm doubtful, but if you got another car for trade-in then you may be lucky

a mate of mine just bought an R34 GTT with alot of brand name goodies on it for $16,500

PFC

HDC coilovers

Greddy EBC

Greddy FMIC

HKS BOV

Defi Guages

etc

but u get what you pay for cuz as soon as he got it... his tranny gave him problems... his tune is farked we think as the car just stalls when u put it in neutral...

bottom line... save up a bit more and get yr car inspected before you buy because you really do get what you pay for

is the BOV atmo? if so, tell him to try the stocker one.. i had problems with stalling when i pressed clutch.. car would stall.. happened after i installed PFC.. due to incorrect readings i think.. worth a shot b4 forking out for a tune

thanks for the replies guys

Im gonna give R32's a miss, GTR or not.

Having driven a few of them, they actually FEEL 20 years old, and everything rattles, car feels like its gonna fall apart.

I'll either save for a R34, or just by another Rexy and be done with it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...