Jump to content
SAU Community

Recommended Posts

SO here I am again, trying to decide what to buy for $15,000 this time.

I was thinking R34, manual, turbo as they are newer and just feel 'sturdier' than a R32 (no R33's thanks).

Look on carsales...hardly anything..and same with these forums.

I thought they were cheaper than that?

I guess I thought wrong :D

I could get a R32 GTR, but to find one in GREAT condition that hasn't been as pounded as Heather Hunter would be pretty hard.

R32 GTR...or R34??

R34 in white or black...hottt, especially with a 'mild' body kit.

someone help!

stagea? i picked up my rs4s for under that and its factory manual (r33 gtr gearbox and diffs) with the rb25 neo (r34 motor)

just keep an eye out for bargins and look at cars in the price range above yours (i.e. 20k) its amazing how much ppl will drop the price if they have to sell

Whatever you pick up...

December & January are the best months to pick up a bargain...

whether it be from 'private' or 'dealer'.

Notwithstanding that, you still need to do all your homework as you inspect - don't rush!

R34 GT-t sedan MIGHT be possible, otherwise you're dreaming if you want a decent manual coupe. Same with a decent R32 GT-R. If you want something in mint condition, get an R33.

If you want something decent, definitely stay away from an R32 GT-R with your price range. You may be lucky to get a clean exterior one, but more than likely motor will be shot, and there may be other problems, meaning, big $$$.

As others have said, for 15k you'd be better off looking at a 33. Or save for a bit longer and buy an R34 like you want

xmas spirit bitch.. time for giving lol

lol

Theres a schmick 5 spd GTT down the road from me at some compliance joint, they are asking 19. Finding a good one for 15 may be time consuming but not impossible.

32 GTR at 15k will be a turd. You're in a shit situation really because you're at the bottom end of the market with your budget. The only Skyline that you will find in decent condition for 15k will be an R33 which you don't want. If you haven't already, go out and drive an R33 and then decide. If you don't like the 33 keep saving for a 34 or 32.

i doubt you can get a r34 for $15,000 unless there was something wrong with it.

back in the day i bought my r33 for exactly $15,000 standard except the exhaust,always garaged pretty much mint condition not a scratch.

that was until i got caught in a hail storm :D

got any other cars for trade-in? best bet would be to go to a dealer and state you got 15k and that's it.. see if they take it or not.. i'm doubtful, but if you got another car for trade-in then you may be lucky

a mate of mine just bought an R34 GTT with alot of brand name goodies on it for $16,500

PFC

HDC coilovers

Greddy EBC

Greddy FMIC

HKS BOV

Defi Guages

etc

but u get what you pay for cuz as soon as he got it... his tranny gave him problems... his tune is farked we think as the car just stalls when u put it in neutral...

bottom line... save up a bit more and get yr car inspected before you buy because you really do get what you pay for

is the BOV atmo? if so, tell him to try the stocker one.. i had problems with stalling when i pressed clutch.. car would stall.. happened after i installed PFC.. due to incorrect readings i think.. worth a shot b4 forking out for a tune

thanks for the replies guys

Im gonna give R32's a miss, GTR or not.

Having driven a few of them, they actually FEEL 20 years old, and everything rattles, car feels like its gonna fall apart.

I'll either save for a R34, or just by another Rexy and be done with it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
×
×
  • Create New...