Jump to content
SAU Community

Recommended Posts

  • Replies 119
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Bosch HEC-716. I have been using them for about 7 years. I went to get some new ones for the first time last year and the design has changed, not even close to how they were. The pic is of the new rail. The plug leads are cut down to suit, so don't think you can just buy them off the shelf. I want to remake it and should beable to get someone like QLD Ign leads to make me a set. That is if they are long enough to fit their machine.

This is the old style HEC-716 wher I had an even shorter plug lead. While it was compact and neat it was a royal pain to swap a set of pulgs in a hurry between rounds. Disreguard the 3L sticker, stiring the pot for some scrutineers hahahaha.

Picture001.jpg

  • 2 weeks later...
  • 3 weeks later...

Work and life have been getting in the way of being able to spend much time in the shed. Easter has been tagged as car time!!!! Yesterday I stripped back as much as i could out of the engine bay and got stuck into seam welding. I've done this a few times now and find it to be very beneficial if you are going to be doing much track work. Seam sealer is a pain because no matter how I try it is always still down in the join, messing up the first little bit of every weld. Bang some heat in, give it a mo, and plough on. I re-seam sealed it all up so the will be no rust concern in 10 years time. By the time I had given it all a rub over with surface prep, prepsol and had the basic masking done, the sun had gone down and taken the light for my spray boot with it.

Picture023.jpg

Picture021.jpg

Picture022.jpg

Back in the shed I wanted to make sure the Fglass guards ,which have been copied off my my race 33, fit up properly. Some little fixups needed.

Picture024.jpg

Painted this morning, primer on any exposed bits first, then satin black. Now, before anyone says, "Should have primed it all rar rar rar" Its a srteet car that will get flogged with regular and absolute gay abandon on tracks. ITS NOT A SHOW PRINCESS.

Picture032.jpg

Picture033.jpg

Picture034.jpg

Just waiting now for some help to push it back in the shed.... when the paint has set a little more though. Want to get the guards and bumper painted to day as well. Tomorrow I should be able to get the motor box and exhaust back in and stone guard the inner of the front guard area. Monday get the bodywork fitted and anything else that has popped up. I've got tues and wed off and planing to take it to a mates panel shop to roll and flare the rear arches. I don't have cool enough toys for that... Yet.

Its definitely an area that I'll be looking at when I rebuild Gentle's front end but that will not be for a few months yet, deff have some ideas to run through. Need to focus on this beast first.

Sat arvo Sara the fantastic spray painting and panel beating champion girlfriend of mine who I love, got the spray putty on and left it to harden overnight. Had to hang it some where.

Picture035.jpg

and today She put the black GLOSS on. I love her sooooooo much!!!! Thank you.

Picture036.jpg

For the record, my painting is not very good. On the result of my first attempt I was told that the finish looked like I had painted it at the beach on a windy day. Not from Sara I must add, she has more tact than that.

It is soooooo close to going for RWC. first I need to pump the rear guards so I going to a mates panel shop tomorrow and wed for some guided hammer wielding!

the motor n box went in today and got everything in the engine bay pretty much completed. The new turbo sits back about 20mm and has made some issues for the piping. Still need to get the fuel system in the boot sorted, that will happen over the next week or so...... I betting on so. The guards and bumper are on properly too now, that took longer that I expected. Looks good though me thinks. a long easter weekend well spent.

Picture.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...