Jump to content
SAU Community

Kliks On The Clock

66yostagea

By 66yostagea,
in Four Door Family & Wagoneers

 Share

Recommended Posts

wolverine Grand Master

wolverine

Posted
Posted

My R33 GTS-t landed with 57,000km in 2001 it now has 214,000km running 220rwkw for most of its life, now with 280rwkw (12mths) still runs fine, compression is fine it feels like it will do another 100,000km with no worries assuming no catastrophic failures of ancillary parts like fuel pump etc.

stageaharts Community Regular

stageaharts

Posted
Posted

Mine has 94,000 almost, imported it with 84k 2.5 years ago, it's seen 6 months of roadwork and a fair whack of time being off road (Most recent 14 months, got it back last Thurs). Purring like a kitten after kidafa helped out with a service on the weekend :thumbsup:

Jezboosted Community Regular

Jezboosted

Posted
Posted

My 99 RS4-S just rolled over to 200,000 last week. bought the car with 130,xxx on the clock a year ago. 95% highway driving, serviced every 10,000k's (oil / oil filter / k&n air filter clean & re-oil).

I use motul 8100 xcess 5w-40. engine is so sweet, no top end noise or bottom end noise. turbo is still smooth, and have been running 14psi using jaycar ebc for the last 30,000k's.

Going to do the timing belt and all driveline fluids next.

This car is my first experience with an RB motor and I love it.

Mr_RS4 Rising Star

Mr_RS4

Posted
Posted
Hey Jeremy, that is the best so far. I think a well maintained 25T can go 300.

I'm not too far behind that, 197xxxkms on my series 1. Still going strong. Just some rattles inside the car but thats probably got a lot to do with the suspension :( But driveline is great. Original turbo too. Runs 11psi. Will be stripping interior and doing a full dynamat through the whole car which should make interior noise a lot better.

GTR-N1 Grand Master

GTR-N1

Posted
Posted
Not a stag but my 93 r33 just clicked over 255000 still goes like a rocket,high boost and all the other go fast bits as well. :cheers:

the secret's in them fried green tomatoes

i know you - kathy bates

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Predator1
      Brake lights staying on.

      By Predator1 · Posted

      +1. Good thing is people wont tailgate you for a while
    • Dose Pipe Sutututu
      Oil pan for RB25DET NEO Stagea "version"

      By Dose Pipe Sutututu · Posted

      If you have a RB25DET NEO AWD motor, you will need this: https://www.hioctanedirect.com/ASR-RB26-RWD-Street-Comp-6.5L-Sump-Suit-R32/33/34-and-VL It is made for the AWD motor, but makes it fit a RWD setup and gives you a new pickup. Just one thing, the pickup sits quite forward, compared to a conventional RB25DET RWD motor. This may or may not have contributed to my previous AWD -> RWD shitting the bed at the track.
    • Kinkstaah
      Starting again

      By Kinkstaah · Posted

      My car is also flex tuned. It's worth mentioning it (the LS1 ECU) has a 1D table for E85 addition and just uses the ethanol stoich part as the second point of reference. It also as a 3D timing map for Ethanol adjustment. You would think this isn't enough but it works pretty damn well. That said, I wouldn't want it in turbo application. It's like lifting non-natty, or taking meth. It gets you unrealistic results that break down more things going forward. If people used it to make the same amount of power they do on 98 then it'd be one thing. But people use it, crank it up to eleventy million PSI, it doesn't knock - but it pushes the point of failure to another, more expensive thing to break. Every time I see someone make 280kw on 98 and 350kw on E85 on the same equipment I just cry a bit and really wish they would just stay on 98 in that exact scenario. It's bad for you. 
    • Chi-Town
      Factory oil temp sensor in a RS4V without gauges?

      By Chi-Town · Posted

      This is kind of what I was thinking but the temp sender wire and the two pressure switch wires run through the starter subharnes and I eliminated the two pressure switch wires completely.  @GTSBoy I have a can gauge with unusually bright warnings should the oil pressure fall so the factory light isn't needed. I need to dig out my wiring diagram and see if I can sort this out.
    • GTSBoy
      Starting again

      By GTSBoy · Posted

      It's a valid point. And it is doable with the Nistune. But I'm not inclined to flex it the way Nistune does - certainly not on a Neo ECU. They're already pernickety enough to tune just one one fuel. And of course, I'm not that interested in putting in a Link or similar, on a daily. With the stock ECU, stock looking turbo, etc etc, I still stand a chance of surviving a run-in with the plod. Last time it went over the pits (which was for the transplant, for because of a run-in with the plod), the Nistuned ECU did not even raise an eyebrow. They want to see a stock ECU running the engine, and they are happy to see it do so without the check engine light** on. Never mind that the Nistune is necessary to make the stock ECU work in a different chassis without ABS, TCS, etc. **And they actually provoke the CEL to come on by disconnecting the AFM, to prove that the globe hasn't been pulled!
×
×
  • Create New...