Jump to content
SAU Community

Recommended Posts

Hey guys, looking for some advice on a daily for my brother:

- Budget around $2.5k

- Not too small (at least 4 doors, though you're welcome to try and sell me on a ute)

- Auto

- P plate legal (even though he's almost 30... :))

- Should be decent on the highway (lives a couple of hours out of Melbourne)

- No mechanical knowledge on his part, so should be cheap to run/fix

- RWD/FWD not important

R31s had crossed my mind (of course)... any of the camrys, magnas etc worthwhile around that price range? Any suggestions would be appreciated, cheers.

Link to comment
https://www.sau.com.au/forums/topic/300358-daily-for-25k/
Share on other sites

- No mechanical knowledge on his part

1.8l Corolla +1

1) fuel fill cap behind rear left door

2) conquest sticker helps one feel impregnable

3) boot release lever near right heel

4) low fuel light tells you to bring out oily rag

5) still runs when hub caps fall off

6) bonnet release lever is near.....aaah forget it. Better take it to the mechanic.

Link to comment
https://www.sau.com.au/forums/topic/300358-daily-for-25k/#findComment-4989971
Share on other sites

early 90's corolla, easy to work on, runs on the smell of an oily rag, cheap to fix, plenty of parts

Agreed, Serviced mine for the first time in about 2 years just last week. They take everything you give them, cost nothing, run on nothing and hold their value fairly well.

Also, 4 doors with power steering and a GREAT A/C

Edited by JiN_MaN
Link to comment
https://www.sau.com.au/forums/topic/300358-daily-for-25k/#findComment-4991000
Share on other sites

I think it's misleading to make out old cars need "nothing done to them".. It's the small things like alternators go, radiators go, bushes get worn, wheel bearings wear out, they get annoying oil leaks, etc, etc. All of these things can cost a bit to get fixed when you add them up over time. Yes, even on corollas. I've had plenty of daily drivers over the years, and they all need things done to them, and it's a pain in the arse having to fix this and that on the daily, when you have a car you'd much rather be spending time and money on.

If your mate is not mechanically minded and able to fix things himself, then he'd probably want something newer.

Link to comment
https://www.sau.com.au/forums/topic/300358-daily-for-25k/#findComment-4991420
Share on other sites

Thanks for the suggestions so far guys.

Re corollas (+ pulsar), I do get their reliability, but they're a little smaller than I was thinking (he has a fairly large dog to ferry around) and the auto paired with the 1.8l might be a bit of a chore - I suspect it's not ideal for long stretches on the highway either.

I checked out the hiluxes but they seem to be almost exclusively >$5,000 or at least approaching it.

Are AU falcons still a good buy these days or are they really starting to deteriorate? Also mid 90s magnas seem to be within reach (might be able to stretch a little to late 90s, not sure), anyone got experiences there?

Also just to clarify on the mechanical knowledge side of things, I think he might struggle to put air in the tyres without help...

Link to comment
https://www.sau.com.au/forums/topic/300358-daily-for-25k/#findComment-4991441
Share on other sites

^ thats alright if your a wannabe drift hero like me (i've nearly bought heaps of them at one point or another lol)

for a young non car guy though, they are just a grandpa's car, and they were built in the dark ages haha. i bet his brother wouldnt like em

Link to comment
https://www.sau.com.au/forums/topic/300358-daily-for-25k/#findComment-4992286
Share on other sites

a friend bought a VP commo on gas, $40 for 500kms and considering how dirt cheap parts are for commos, seems good. however, finding one is a different matter.

i would go r31, petrol wont be perfect but at least its a half decent car.

Link to comment
https://www.sau.com.au/forums/topic/300358-daily-for-25k/#findComment-4992760
Share on other sites

2.5k is really a small budget - The price of the car may end up being close to 4 to 5 k over time after replacing this and that

If he can stretch the budget to 5k - he probably could get a better/newer car, especially with the distances he will cover.

V6 VR/VS commodore or newer...

- Parts are cheap

- Many mechanics know how to work on them - therefore more choice of workshop/competitive pricing.

- Most are auto and have A/C

- Run on regular unleaded

- Do not require expensive fluids/oils

- Safer than smaller cars of the same era

- I wouldn't bother having it on gas - LPG systems require more maintenance and add another layer of complexity... Your savings will be negated...

Link to comment
https://www.sau.com.au/forums/topic/300358-daily-for-25k/#findComment-4992887
Share on other sites

Are AU falcons still a good buy these days or are they really starting to deteriorate?...

'Current market value' of an AU is around $3500 to $4000. There are some decent AU's on the market but you'd be looking at over $4000 for a good one.

iseekool's list above also applies to an AU.

JH (AU owner ... as well as a Skyline!)

Edited by jrh001
Link to comment
https://www.sau.com.au/forums/topic/300358-daily-for-25k/#findComment-4993035
Share on other sites

my u13 bluebird in sydney is up for sale :)

2.5k cash its yours

Now we must market a'hem embellish this beautiful car properly Chris...

1) red/white/blue Nissan '80s livery (makes rust imperceptible)

2) signed autograph on bonnet by 'evil_weevil' (improves desirability to future owner)

3) suitable for any castle (where no more, does king Kerrigan say, "Tell him he's dreamin'!")

There we go..., 2.5k cash its yours

Link to comment
https://www.sau.com.au/forums/topic/300358-daily-for-25k/#findComment-4993068
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
×
×
  • Create New...