Jump to content
SAU Community

Recommended Posts

spotted me getting a spanking from a zx-6 on the way to work this morning. he was geeing me up for about 2km's, popping mono's and asking the question. i was hoping that he'd fall off if he hit it hard enough!!!! HA! also saw a nice black s13 with chromies and a monster tacho, which i munched after he saw me loose to the bike and tried the same thing!!!! HAHAHA!

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/261/#findComment-1837711
Share on other sites

Not really a spotted, but my limey green gal has just been sold!!! I had one last drive in her yesterday trying to get a blue slip (long story) but all to no avail, because as soon as the idiot at pharleys (dont bother going to him) wouldnt touch it without an engineer certificate. This was not due to the a/market turbo, but the FMIC and pod. Sounds like it is new legislation in NSW. Crazy 'cos he didnt give a toss about anything mechanical about the soarer in april. Mind you, no-one else that we contacted would do it without a certificate either. Oh well, she has gone to a loving home, which is what I really wanted. (sigh.....)

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/261/#findComment-1838376
Share on other sites

Spotted so many lines out last night - Nathr32 gave way got one back:) R33 GTR gave wave, said hello, was returned:) And also had a chat to Mr.Italy, If your wondering what was wrong, was a crack in a T peice off my block... Should be fixed today:)

Dayne

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/261/#findComment-1840306
Share on other sites

spotted lots of lines last night. sick 34 gtr. couple of 33 r's. stirlo and the yellow peril. and yeah that pimped cima. they aren't purple flames - its harlequin/effects/flip stuff... the owner is from perth or something - from xspeed from memory - and he's been in canberra a few months now. tis a sick car tho.

and yes. racialnats are here

d

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/261/#findComment-1840956
Share on other sites

spotted all the same, don't wanna sound repetitive but stirlo, nath, and a few others

went to maccas for dinner and saw a security guard there, thought WTF and had a chat to him. same as what andy said, busloads of lebanese blokes coming down from sydney, and messages being spread about fights.

shitheads.

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/261/#findComment-1840995
Share on other sites

Spotted Jayce and I deciding on which way to beat up Mick after seeing him with the neons on in Braddon :D

I'm a big fan of neons.....but dude! we could see the tubes, which ruined the effect! just hide those tubes and it'll look sweet ^_^

Link to comment
https://www.sau.com.au/forums/topic/30059-spotted/page/261/#findComment-1845165
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...