Jump to content
SAU Community

Recommended Posts

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

...trust me dude, u will ;)

u will get some commodore driver next to u when ur on P plates and u will look over and go "pfft... what a joke" and he will rev the nuts off the car, and u will both piss bolt. (u leaving him for dead... of course :) )

just be very careful dude, my car is a bit scary and mine is NA. although im learnin to drive it alright etc and trust it fairly well so far. sorta know what mine and her limits are, without pushing them tooo far.

dude dont forget that thing spools up at like 2 -2500rpm

so please no corners at speed for a long while.

i think you will be fine. You look like you got a level head so I dont expect any incidents anyways. man all i can see is the grin on your face bro

thats burned in my head now

nah man you bought it for that price,

its nothing to me man. just people will be like what the fark so cheap for. like a few of the boys have already said to me, when i said how much i was gonna let it go for.

ahahahahahhaa you took a pic of the dash glue cover up. farny stuff. if you ever speak to a detailer etc ask em if there is something to get rid of that &*^$& glue

honestly dude i would get the deck insured when you do your paperwork and then leave the face on 24/7

that way when the deck gets stolen the whole thing is gone and then the whole thing gets replaced. when my gsr got raped the deck got taken and i had the face, they tried to get only the deck part, how shit is that.

took ages and then in the end didnt work out but all they would pay out was the cost of the deck only, but not including face, which meant i had to still put money in to get a new deck complete.

and i would try car stereo city or the new JB hifi cos they will prolly have bits like that

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
×
×
  • Create New...