Jump to content
SAU Community

Recommended Posts

I've been considering getting the HID R33 headlights, but they go for a pretty penny here in Japan. found some new in the box for 1600 USD. not worth it at all. that's my Tomei Oil Pump, or something else useable.

Since I'm typing- updates today. Replaced starter, old one said goodbye over the weekend filming that video. That is the most pain in the ass starter I've ever had to replace, took me over 2 hours of pleading with god to get the top bolt off. Also removed the sound deadening that was cemented to the floor pans and such. On the prowl for a roll cage, interior sprucing up after that.

pffft wow! no shit that looks tuff with the new wheels 30profile thats brave ahah, love that last photo too!

Thanks mate. These are probably going to be my cruising wheel/tire combo, as it's a terrible set up for the track. probably will opt for the more standard 18"/35 series on the track.

Oh.... that last photo made me all tingly inside (DOF shot)... Hires plz? :)

here ya go, it's 28 megapixels though.

4754245171_9fe42206ca_o.jpg

also, completely removed the sound deadening that is cemented to the floor panels. Use a pneumatic chisel and bulldozed it in just over an hour. Screw the fancy dry ice shit. haha, this way cost me free 99. And to celebrate here's a weight update.

Weight update...

Removed rear seat and rear seat safety belts for 31 pound/14.1kg reduction.

Stock Trunk Carpeting - 11.5lbs/5.2kg

Stock Floor Mats - 13.0lbs/5.9kg!!

Stock Jack/Tire Iron - 4.5lbs/2.05kg

Stock Spare Tire - 34.4LBSSSS/15.6kg

Nissan Air Purifier,sound deadening behind back seat, car jack - 9 lbs/4.1kg

metal plate behind the back seat - 6.4 pounds/2.9kg

Stock suspension 57.8lbs/26.3kg and HKS Hipermax 47.0/32.3kg - 10.8lbs/6kg net loss

door panels 14lbs/6.35kg

carpet and various pieces of plastic 16.2/7.3kg

Center console 7.6lbs/3.5kg

passenger seat 34lbs/15.4kg (with rail attached)

Difference in test pipe/cat 6lbs/2.7kg

new seat/rail vs old seat/rail 5lbs/2.3kg

dash stripped to shell - 3lbs/1.36kg

difference in exhausts 24.2lbs/11kg

all sound deadening 12lbs/5.5kg

=

242.6 pounds/110.3kgs

Stock R33 GT-R 3388lbs/1540kg

so I'm at 3145.4lbs/1429.7kgs. Still heavy! Still to come out. Rear windshield wiper assembly, HICAS, switch to CF Driveshaft, stock exaust manis, outlet pipes and downpipes.. to be replaced with SS and titanium respectively, and more!

Ive been going through this thread and im frickin loving the work mate,thats real talent.It'l be the ultimate test for a permanent marker lol

Just imagine if it was in fluoro sharpie haha thatd be sick.

rb30 huh? OS Giken sells an rb315 kit to up your 26 displacement to 3.15L

http://www.osgiken.co.jp/pro_spec/rb30kit.html

Nice work btw; love this thread.

sounds cool, but for almost 20,000 USD, I can buy an insane engine already done up vice the OS Giken stroker kit :D

I'd like to thank Fast Car Magazine! Maybe when the car is done, they will be interested in a bigger spread!

DSC_3683.jpg

DSC_3685.jpg

Build is on hiatus until after I purchase Allison an engagement ring. Shhhhhh!

polished the headlights, and removed the A/C radiator/fan. compressor is next but i didnt go to the garage today.

DSC_3696.jpg

DSC_3701.jpg

DSC_3708.jpg

DSC_3711.jpg

the radiator and fan weighed 15lbs/6.8kgs

Weight update...

Removed rear seat and rear seat safety belts for 31 pound/14.1kg reduction.

Stock Trunk Carpeting - 11.5lbs/5.2kg

Stock Floor Mats - 13.0lbs/5.9kg!!

Stock Jack/Tire Iron - 4.5lbs/2.05kg

Stock Spare Tire - 34.4LBSSSS/15.6kg

Nissan Air Purifier,sound deadening behind back seat, car jack - 9 lbs/4.1kg

metal plate behind the back seat - 6.4 pounds/2.9kg

Stock suspension 57.8lbs/26.3kg and HKS Hipermax 47.0/32.3kg - 10.8lbs/6kg net loss

door panels 14lbs/6.35kg

carpet and various pieces of plastic 16.2/7.3kg

Center console 7.6lbs/3.5kg

passenger seat 34lbs/15.4kg (with rail attached)

Difference in test pipe/cat 6lbs/2.7kg

new seat/rail vs old seat/rail 5lbs/2.3kg

dash stripped to shell - 3lbs/1.36kg

difference in exhausts 24.2lbs/11kg

all sound deadening 12lbs/5.5kg

radiator and fan 15lbs/6.8kgs

=

249.4 pounds/117.1kgs

Stock R33 GT-R 3388lbs/1540kg

Lost Birds R33 3130.4lbs/1422.9kgs.

Edited by istdercollen

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...