Jump to content
SAU Community

Rb26dett Rebuild

DemsA31

By DemsA31,
in South Australia

 Share

Recommended Posts

DemsA31 Enthusiast

DemsA31

Posted
Posted

well, just did a suspected ringland in my 32 GTR. Starting pumping massive amounts of smoke out of the catch can, lost power, lost compression. So now im guessing im gonna rebuild it.

Whos had it done? where did you get it done and what mods did you do, and most importantly, how much did it cost?

Cheers,

Dan

Link to comment
https://www.sau.com.au/forums/topic/307377-rb26dett-rebuild/
Share on other sites
Dohmar Grand Master

Dohmar

Posted
Posted
well, just did a suspected ringland in my 32 GTR. Starting pumping massive amounts of smoke out of the catch can, lost power, lost compression. So now im guessing im gonna rebuild it.

Whos had it done? where did you get it done and what mods did you do, and most importantly, how much did it cost?

Cheers,

Dan

If i was to get one rebuilt, I'd be trusting the guys I get to do everything (Hint ; theyre in my sig) but if they couldnt do it, I would go to Mildrens (North) or Manta (South)

Just make sure u do the research and use the right preventative parts, if you do a good rebuild it'll last u a lot longer than just replacing stock parts.

$0.02

-D

heslo Grand Master

heslo

Posted
Posted

I'd be hitting up Rhemac. I've not dealt with them personally but know a few people who have and not a bad thing to say and awesome engines to boot. Honestly though, go to a couple of places and speak with the people, that's the best way to get a read on them, see what they offer, how much, etc and make your choice from there

Tommmo Proficient

Tommmo

Posted
Posted

having done this myself in the past 12 months... I can definately tell you who NOT to use,

however if I was to do it again, i'd probably go with Chris Milton (http://www.miltonengines.com.au/index.htm)

My advice is speak to a few different ones, get written quotes, do as much research as you can before committing to anyone.

Goodluck mate..

SLED Grand Master

SLED

Posted
Posted

assembly of a bottom end or heads makes no difference whether it's a pushrod motor, OHC or even diesel.....knowledge of tolerances & procedures is what you need.

I'd personally be getting an engine reconditioner to do the assembly not a tune shop or service & repair shop........unless it's Willal or JK.

writeoff Mentor

writeoff

Posted
Posted
Peter Hall (ex Willall Racing) at JMS or James from Nisspeed :D
pete is a champ!

Unless he has changed jobs since late last year Peter Hall is the manager of Autosport on Magill Rd and no longer does engine rebuilds (it was one of the reasons that he left Willall).

I used Steve Cramp at Manta Racing. He will be more expensive than most places you go to but, as in most things in life, you pay for what you get. Peter Hall recommended Steve to me and I continue to use Manta to this day for all work on my GTR. After going to 6 places I'm happier to pay more for someone who won't make a mistake or try and cut costs. Do it once, do it properly. If only all others within the car industry were as good.

Weezy Grand Master

Weezy

Posted
Posted

If my 26 went bang,

I would choose a tuner that I would stick to, and then I would goto an engine builder that they use, that way the two go together and the tuner will know 100% what work has been done and then the tuning will perfectly compliment the engine build so once you work out whose going to tune your car, go from there.

I've heard nothing but good things from Lewis engines too.

Race__24 Experienced

Race__24

Posted
Posted (edited)

Rhemac at Gawler - Best place in SA for engine work and machining. John from their servicing department knows his RBs inside and out, as he was at JMS back in the days and has built a few.....

Plus an employee built a "no expence spared" RB26 over 400 AWKW and reved to over 10K, from what I've been told.

Edited by Race__24

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB25DE NEO with Haltech ECU

      By GTSBoy · Posted

      I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • Murray_Calavera
      RB25DE NEO with Haltech ECU

      By Murray_Calavera · Posted

      @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
×
×
  • Create New...