Jump to content
SAU Community

Recommended Posts

Hi Guys,

Just found out ive got a cracked cyclinder head, and im trying to figure out what to do.

Im not too bad with doing basic mods.. but i have no idea when it comes to complexities of the engine/internals itself.

Do I:

Repair/fix existing crack?

Engine swap for another RB25

While its out go forged or RB30DET?

meh its out.. get a cheap Nissan v8 engine.

or other..

as i said.. i have NO real idea what to do at this point, i havent been quoted YET for fixing/repairing the existing head.

My goals for the car at the moment are very open.. i WAS aiming for epic responsive RB with 250-260rwkw.. however if im going to buy a new engine, why not do work on the engine for 3-4 months and aim for a higher power output since the engine is out/alot easier to mod.

atm i aim to finish the engine with 10k to spend TOTAL.. dont add in costs of selling existing block/turbo.

part of the 10k will go towards Exhaust+clutch+fuel pump+ecu+ebc.. so take that outta the total.. wanting reliability if its not too much to ask for also..

Car already has an Apexi turbo to make the 250/260kw..just hasnt been boosted yet

Thx for any/all HELPFUL input.

Edited by illusiVe
Link to comment
https://www.sau.com.au/forums/topic/307736-cracked-cyclinder-head-now-what/
Share on other sites

10k doesnt go far, especially when ur handy rather than totally competent. Not having a stab just being honest.

put another head on it and get back to doing good valuable bolt ons with ur 10k :P

I had my head ported out while been decked with tomei cams, guides, seals, seats.

valve guide in #6 overexpanded, cracked the head, ruined.

the machinist shop and my tuner/workshop re-did another head for me no charge

car had coolant.. but you see if you remove sparkplug #6 and look in there and crank the engine, you will see coolant going in there.

so yeh.. coolant leak is for sure.

Just gave my mecchy the go ahead to take the head off and tell me whats broken.. and ill update thread from there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...