Jump to content
SAU Community

Recommended Posts

You forgot to say where you are?

Bavariacars Motorsport specialises in putting propellers on BMWs + other mods

www.bavariacars.com.au

02.98797557

They're often stallholders at BMW Drivers' Club Events

Talk to the CEO Herbert Gattermeier

Link to comment
https://www.sau.com.au/forums/topic/308029-your-tuner/#findComment-5085445
Share on other sites

You forgot to say where you are?

Bavariacars Motorsport specialises in putting propellers on BMWs + other mods

www.bavariacars.com.au

02.98797557

They're often stallholders at BMW Drivers' Club Events

Talk to the CEO Herbert Gattermeier

in sydney. I'll go onto their site. cheers

Edited by Amir
Link to comment
https://www.sau.com.au/forums/topic/308029-your-tuner/#findComment-5085457
Share on other sites

Depends what you want done. Aftermarket or chipped standard ECU.

That does seem a little expensive but there is always going to be a premium for working on such a new, expensive car unfortunatly.

Anywhere should be able to do an exhaust, intake and intercooler setup for it but the ECU will be tricky.

Link to comment
https://www.sau.com.au/forums/topic/308029-your-tuner/#findComment-5085471
Share on other sites

Depends what you want done. Aftermarket or chipped standard ECU.

That does seem a little expensive but there is always going to be a premium for working on such a new, expensive car unfortunatly.

Anywhere should be able to do an exhaust, intake and intercooler setup for it but the ECU will be tricky.

I would like to get the usual upgrades like fmi, intake, full exhaust, and tune. Not after a full aftermarket ecu, maybe a piggyback or remapped std ecu. This appears to get around an extra 70-80kw at the wheels, and approx. 110Nm torque which will be plenty for me. For these mods the qoute was just under 11K.

Most tuners are dabbling in different makes, so hopeing someone on here knows a non-euro bunch that can mod the 335.

Link to comment
https://www.sau.com.au/forums/topic/308029-your-tuner/#findComment-5085488
Share on other sites

what model 335?

i'm guessing you're talking post 07?

you could get the exhaust, FMIC piping etc fabricated and save a few dollars... the best bet is to go into your respective state's section on here, find out about tuners and just call them one by one

Link to comment
https://www.sau.com.au/forums/topic/308029-your-tuner/#findComment-5085560
Share on other sites

ive had a few through, i will chase up the graphs. From memory it cost them around $2000 for a "tune" and we did before and after and the only change was the boost :blink:

Be wary though as most shops here just load in a generic german map which is usually just a boost cut speed cut and boost increase (for $2k),

i had one M3 come in and lose 29rwkw, from 239 down to 210rwkw (and 30nm) with the so called leader in BMW performance's flash tune (see attached) :P

post-34927-1266032392_thumb.jpg

post-34927-1266032501_thumb.jpg

post-34927-1266033010_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/308029-your-tuner/#findComment-5085803
Share on other sites

Tony,

Is this what Ben's 335i have in when he took me for a spin?

Cheers

Grant

p.s. time for me to save up a lot to get one of these!

haha yep, thats the one. you can appreciate how impressed i was when i drove it. the power just kept pouring on like there was no end to it.

shame about the open wheeling diff though.

Link to comment
https://www.sau.com.au/forums/topic/308029-your-tuner/#findComment-5085959
Share on other sites

http://www.burgertuning.com/

my mate installed their chip, filter, and boost lines, on his 335i twin turbo 08/09?

all up around 1k if i recall.

great results, no tune, no dyno, no mods.

yeah that is the boost chip. Pretty sure the last guy who came in upgraded the diff to a better ratio and lsd :blink:

Link to comment
https://www.sau.com.au/forums/topic/308029-your-tuner/#findComment-5085963
Share on other sites

haha yep, thats the one. you can appreciate how impressed i was when i drove it. the power just kept pouring on like there was no end to it.

shame about the open wheeling diff though.

Yes, I was simply blown away with how hard this thing goes, I told Ben that it's quicker than 270rwkw GTR I test drove, yes shame the diff is open, is it fitted with LSD now?

I'd be happy with the 335i and 100k in my pocket. Then spend 5k on the 335i and smoke the M3 :)

+1

Link to comment
https://www.sau.com.au/forums/topic/308029-your-tuner/#findComment-5086343
Share on other sites

Yes, I was simply blown away with how hard this thing goes, I told Ben that it's quicker than 270rwkw GTR I test drove, yes shame the diff is open, is it fitted with LSD now?

no he didnt fit an lsd. apparently to replace the diff was some stupid amount of dollars. he sold it now anyway and bought a sedate 2L supercharged merc. really nice car. not a powerhouse, but good for cruising etc.

Link to comment
https://www.sau.com.au/forums/topic/308029-your-tuner/#findComment-5086841
Share on other sites

Yeah the diff replacements can get quite costly. A few companies in the states make some good upgrades with the diff. I've been following the development of the 335i parts from the US forums for some time now. I definetely would like to get one in a few years time once im settled in career wise and the prices go down a bit.

Link to comment
https://www.sau.com.au/forums/topic/308029-your-tuner/#findComment-5086896
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...