Jump to content
SAU Community

Recommended Posts

Hi Fellas,

I was recently having a few issues with my car with low power output. However, I change the spark plugs (Put NGK platinum ones) and the power was back up (wheels spings in 3rd gear :down: )

Anyway, 3 weeks of driving, the power is back down, had a look at the spark plugs, and they are fouled, yet again...

I cant keep forking out $150 every 3 weeks to change the spark plugs, so what do you guys suggest?

I have a built rb25/30 block, forged pistons, rods, the whole shabang. GT35r turbo, Autronic SM4.

Went to the tuner last week, AFR were perfect throughout so I am not too sure whats causing the fouling? Will I need to get hotter plugs? I am currently running the NGK PFR6G-11 5555 at 0.8 gap.

Not sure what heat rating these are.

Any suggestions are welcome.

CHeers fellas.

Link to comment
https://www.sau.com.au/forums/topic/308303-spark-plugs-keep-fouling-why/
Share on other sites

Do you have any rich spots in your tune, even small events? i.e. just coming onto boost, or injection cut on deceleration?

Are you getting any misfires, especially on boost?

as i understand it, plugs foul cos of rich condition and/or lack of spark (not igniting the mix)

maybe something to do with the gap?

with 22psi (going by whats in your sig) you might need a colder plug. most people run 6s on stock engines/lower boost.

what did your tuner have to say?

good luck bro

what kind of driving do you do?

constant short trips (5mins or so to work i the morning) when the car is cold and not hitting boost can foul plugs pretty easily...

if this is the case take it out for a nice longer drive and boost it a bit... it should clear up.

otherwise, look at your tune again... most likely too much fuel somewhere.

plugs to use would be bcpr7es @ 0.8

what kind of driving do you do?

constant short trips (5mins or so to work i the morning) when the car is cold and not hitting boost can foul plugs pretty easily...

if this is the case take it out for a nice longer drive and boost it a bit... it should clear up.

otherwise, look at your tune again... most likely too much fuel somewhere.

plugs to use would be bcpr7es @ 0.8

Pretty much 5-10 min drives to work and back each day, car doesn't even get a chance to fully warm up.

As for these bcpr7es, what heat range should I get?

How long do these spark plugs generally last?

I wouldn't mind changing them once a month, anymore than that gets annoying....

Thanks for the input :P

Pretty much 5-10 min drives to work and back each day, car doesn't even get a chance to fully warm up.

As for these bcpr7es, what heat range should I get?

How long do these spark plugs generally last?

I wouldn't mind changing them once a month, anymore than that gets annoying....

Thanks for the input :P

Theres your answer, you need to trim the temp compensation.

bcpr7es, usually 7-12 months depending on driving Kms.

the 7 in the number IS the heat range

mine last 20,000ish with 300rwkw

if your car is always on cold start / idle then try giving it a good run and boosting it for a while and see if the plugs clean up a bit.

if they do then you know which part of your tune has too much fuel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
    • I don't have the OEM oil feed lines though and the turbo-wraparound line is torn, only has water. My plan is to get replacements for these and just connect a braided line to there. And make sure it's leak free. Hoses like these are also sometimes used to connect external wastegates, so for an EGR I think you're good using them.
    • Alright I understand. The most likely case is probably gonna be that I just keep the OEM unit in the car as long as it works.
×
×
  • Create New...