Jump to content
SAU Community

Damo's R32 Gts-r, On Going Project Fun Car. History And Use Full Info


Recommended Posts

funnely enough my uncles new super sedan engine lasted 2 laps on boxing day.... it was machined by the same people....as was my old head which failed

Well it doesn't really matter unless your going to use a northern Tasmanian machinist. I'm not keen to bad mouth anyone I just won't use again

  • 3 weeks later...

I've been slowly rebuilding the engine myself this time around with some helpfully hints from others. I mean of you have a book in front of you and some people to assist if things don't seem right than its like anything elce really.

Sunday's last job was to pull apart the oil pump and clean it. Well there was a surprising amount of piston bits that had been through the oil pump gears. It was then decided that I would replace the gears with another standard rb20/25 set. Tonight i pulled apart a rb20 pump. First thing I noticed was the gear shape was different. Then the thickness of the gears was also different. A quick look through some other bits and I found that I had stumbled apon a n1 oil pump.

This pump was pulled out of a box of engine parts I had brought years ago for a small amount of cash and fitted to the engine last time I had it built as it seemed newer than the original.

The big question I have for anyone that has ever pulled down a neo engine is. Do neo rb25s have n1 pumps? As all my bits were supposed to be neo engine bits.

Someone said recently in a thread I was posting in that Neos do indeed run N1 pumps standard. FAST says they use the normal pump but they may have changed during production run etc...

  • 1 month later...

I literally haven't touched this car for a good 5 weeks. The oil pump pull apart was the last job i had done and it's been staring me down every time I walked into the shed. I vow to never attempt to build/ major works on my own car over the summer period again. My work load and social life double in the short but sweet tassie summer. I am looking forward to long nights in the heated shed over winter when there simply isn't anything better to do.

So with 5 minutes notice I told Ben we were assembling an engine and that's what we did Sunday arvo. The bottom end is now complete. Waiting in a hg as i ordered the wrong one in a moment of dumb then the head can go back on.

Some extra bits I've picked up over the past 5 weeks are arp head studs, nismo adj fpr, r33 gtr dash cluster, gktech offset rack spacers and long hollow wheel nuts and a stack of pro flow fittings to plumb the boost controller nicer.

Things i have done on the side are. Repair exhaust manifold cracks. Make new brake line. And modify inlet side of the gtr throttles. Some pics of all of this to come.

  • 2 weeks later...

some pic time

GKTech long hollow wheel nuts

studs_zpsdc77e70f.jpg

all engine bay wiring excluding engine harness and oil pressure line through these neat gland nuts where the speedo cable hole once was

gland_zpse93f6715.jpg

brake booster delete plate with modified brake lines

booster_zpsf198c308.jpg

some mods to GTR throttles in this pic i have shaved off any unnecessary mounts and tapped a hole for a vacume feed to the fuel pressure reg.

balance_zps68cc6d0c.jpg

and lastly for tonight semi completed engine

block_zps2c689c19.jpg

Engine in tuesday night after a small issue with box and engine alignment. The last 2 box jobs I have done have taught me a lot. I've obviously had lunch on my side the numerous times before.

Bens head back on and some minor plumbing done on my engine tonight. If nothing less the engine bay should look show worthy.

Yeh engine out time gives you a good opportunity to fix annoyting things. But deadlines and economics always make you stop short of all the things you would like to do

Isn't that the truth!

Were you logging AFR's when your injectors were failing? Because we have noticed issues with the Bosch injectors in our race car also. It seems over time the alcohol swells the rubber seat inside the injector and they gradually lean themselves out. Its possible your injectors may have been flowing closely when you got them, but this issue presented and left them partially stuffed and now they flow out of spec.

  • 1 month later...

Quick update

got car running last minute as usual. got it going last thursday night. while loading it on the trailer to go to dyno friday morning realised the brakes were stuck on due to incorrect adjustment of my brake pedal after making a booster delete plate. car got dynoed with brakes locked on. f**ked pads, calipers and split brake lines.

off to local brake place friday lunch. new lines calipers pads and full system bleed. got to track saturday morning. was pretty sketchy. ended up hitting a concrete wall after a few runs . fixed suspension and continued driving. sucked at batteling and got knocked out of top 16 but after setting into the car mid afternoon i won the extreme entry comp being 15km faster than second place.

no positive dyno result due to brake issue. and to add to that the car still has a fuel supply issue that i am working through now ready for another weekends racing.

but on a plus note the majority of the panel beating was fixed today so im not sad about it being bent any more. thanks to Grunt life's quick response.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...