Jump to content
SAU Community

Recommended Posts

This is a true story that happend to me - Tyres are Khumo 265/35/18 Esta less then 10,000k had a pucture but I didnt realise it was flat as I rarely drive it and I dont know how long I have been driving on it for. Finally realised it when i went to check tyre pressure ( usully check every 3 month ) Fixed the puncture ( was a small screw )

Driving 60km is fine, anything over 100km/hr car shakes real bad ( got front wheels aligned when i got new tyres ) still shaking over 100km/hr before Xmas to pass Rego before i went on 5wk holidays.

Came back on holidays and found pigeons have made nest on my Balcony - having no choice as i dont want pidgeon poo every I got rid of the two eggs ( this is like the 4th time they set nest on my balcony - one time I let them hatch and let the pidgeon grow up and fly away - but cleanup was yukk never again 3 months of pidgeon poo ). and then on Australia day went for a drive to the cemetary at Pinegrove. I checked tyre pressure before i went and pumped it to 40.

Coming back from Pinegrove to Parramatta, heard the loadest POP, loader then exhuast backfiring. Pulled over into side street as i knew i had a flat tyre. Changed it with the space saver. Space saver was a bit soft was OK - but less then 50 meters it gave out also. So i limped all the way back home as i ran out of options.

khumo1.jpg

khumo2.jpg

khumo3.jpg

space1.jpg

space2.jpg

should have stayed home that day.

Link to comment
https://www.sau.com.au/forums/topic/309137-has-this-ever-happened-to-you/
Share on other sites

k what happened to your tyre is when u got the puncture repaired it was done on a tyre that was run well under pressure which damages the internal side wall of the tyre and that is the reason for the blow out.

you should also when you check your tyre pressures also check that of the spare tyre so u would run into this problem

+1 for the pigeons.

as for your tyre letting go, driving on it flat is what did the damage. then it probably would've had an egg on the side which caused the vibration and it eventually let go.

oh and i check/alter the pressure in my spare every 6 months.

what the f**k +1 what do pidgeons have to do with this story.

i use to get blow outs like this when i ran kumho's on my accord euro admittedly was low as fk but tyres would wear out in 5000ks cos of camber and 3 of the rear's blew out same as this, but not from driving while flat *shrug*

Lol at the Pidgeons.

That'd scare the heck out of me. I dont even carry a spare.

Once you've had a drive on them when they are flat then its generally too late to replace. When the flat tyre comes off the rim (if its been driven whilst flat) its usually filled with powdery rubber.

The only time i've ever had a tyre blow out on me was a long time ago when my ol Lancer got into a drift (in the dry around a corner, NO handbrake) hit a gutter side on and blew out front and rear passenger side tyres. Needless to say that only ever happened once a very long time ago now.

what camber are you running? seems odd to have the space saver roll off the rim too, unless it was dead flat and you were driving too fast.

Maybe the pidgeon's sabotaged your tyre, slashing it with their katana's when they realised you eated their eggs for breakfast that day..... hmmmmm

n48059684620_8602.jpg

I always check my pressures everytime I fill up (once a week) and the spare once a month.

Oh and if you're not a pleb, you can feel when you have a tyre with lower pressure.

Edited by bubba

As said driving whilst flat/low pressure will damage the sidewalls, so replace the tyre.

To the fella with the accord euro, a relatively crap tyre with way too much camber (and probably too much toe) will put huge amounts of load on the hinge point of the tyre, which is probably why you got so many blowouts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...