Jump to content
SAU Community

Restoring A 32gtr Back To Original Factory Spec

RSVFOURUK
 Share

Recommended Posts

Greanmachine UK Explorer

Greanmachine UK

Posted
Posted

Due to me forgetting my password and changing my email address I have had to re register under grean machine and rather than start this thread again i will update it using my current name. Hope that’s in order.

So an update with apologies for the poor quality pics but they were taken on my phone

The new suspension is on

.

IMG_0727.jpg

The exhaust is fitted and sounds remarkably sporty

A few more parts have been sourced ..........

A mint dashboard with good vents out no bubbles

073.jpg

dash removed (not as hard as I expected)

086.jpg

and new one in

IMG_1237-1.jpg

Original wheels and brakes are now on. Only issue was the rear calipers had been p[ainted silver . Luckily this had been done badly so all the paint came off easily with nitromors and just left the original satin black finish.

Also a had a major find and probably my favourite one.........an original japanese 32 GTR sales brochure in mint condition

IMG_1246-1.jpg

IMG_1244.jpg

I have also found a set of original mats in as near to perfect condition as I could hope for.

Nearly all the silly little bits have been sorted - pedal rubbers and a few internal clips and trims

I did find an original radio but it has the plastic covers missing so am on the hunt for a better one

Also need to find the right fasteners for the wind deflectors - they are on and fit but are not fixed well enough to drive the car yet. I may be better off going to Nissan that is if they still do them ?

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Nee-san Grand Master

Nee-san

Posted
Posted

Due to me forgetting my password and changing my email address I have had to re register under grean machine and rather than start this thread again i will update it using my current name. Hope that’s in order.

So an update with apologies for the poor quality pics but they were taken on my phone

The new suspension is on

.

IMG_0727.jpg

The exhaust is fitted and sounds remarkably sporty

A few more parts have been sourced ..........

A mint dashboard with good vents out no bubbles

073.jpg

dash removed (not as hard as I expected)

086.jpg

and new one in

IMG_1237-1.jpg

Original wheels and brakes are now on. Only issue was the rear calipers had been p[ainted silver . Luckily this had been done badly so all the paint came off easily with nitromors and just left the original satin black finish.

Also a had a major find and probably my favourite one.........an original japanese 32 GTR sales brochure in mint condition

IMG_1246-1.jpg

IMG_1244.jpg

I have also found a set of original mats in as near to perfect condition as I could hope for.

Nearly all the silly little bits have been sorted - pedal rubbers and a few internal clips and trims

I did find an original radio but it has the plastic covers missing so am on the hunt for a better one

Also need to find the right fasteners for the wind deflectors - they are on and fit but are not fixed well enough to drive the car yet. I may be better off going to Nissan that is if they still do them ?

pretty sure you can buy the head unit fascia from nissan quite cheap mate.

  • 3 months later...
  • 1 month later...
Greanmachine UK Explorer

Greanmachine UK

Posted
Posted

Well after a very lomg time the car is finished :yes:

A few pictures

gtr1.jpg

gtr4.jpg

gtr3.jpg

gtr2.jpg

the refurbed splitter - all my own work was previously really badly scatched

gtr7.jpg

gtr10.jpg

gtr6.jpg

gtr5.jpg

The colour is weird unlike mosts pearlescents it doesnt flip along one side - the whole car seems to look different colours in different lights ...Today was a blue day

G0Z1LLAAAAA34 Rising Star

G0Z1LLAAAAA34

Posted
Posted

I don't think the colour is factory colour? Correct me if I'm wrong. And I'd ditch that red strut brace too. It all be interesting to know how a 100% stock r32 gtr feels like with boost restrictor and ceramic T28s. Good work though! :)

G0Z1LLAAAAA34 Rising Star

G0Z1LLAAAAA34

Posted
Posted (edited)

Did you even read the thread?

Sure did. Just saying I though the colour wasn't factory. But I just researched it and there is a factory option in this colour. Just a little weird seeing the engine bay is in a completely different colour haha.

Edited by G0Z1LLAAAAA34
Greanmachine UK Explorer

Greanmachine UK

Posted
Posted

Did you even read the thread?

Thanks - saved me saying it.

So to confirm the idea was to restore it to factory spec - thats why the strut brace is red

No 32GTRs were painted with the same paint finish under the bonnet a lot had a different colour under the bonnett and the ones that were the "same" were a matt finish so looked out of place just as much.

All mentioned in the thread ...............

G0Z1LLAAAAA34 Rising Star

G0Z1LLAAAAA34

Posted
Posted (edited)
Thanks - saved me saying it. So to confirm the idea was to restore it to factory spec - thats why the strut brace is red No 32GTRs were painted with the same paint finish under the bonnet a lot had a different colour under the bonnett and the ones that were the "same" were a matt finish so looked out of place just as much. All mentioned in the thread ...............

Oh really? I really didn't know that after having 3 R32 GTRs myself.. It is fair if the engine bay colour is close to the panel colour however OP's r32 has a completely different colour in the engine bay. Almost looks like it was a silver car to start with but resprayed the exterior to that blue if you get me... Here is a photo of my red metallic r32 gtr engine bay...

266350_10151075166106121_1318281766_o.jpg

Edited by G0Z1LLAAAAA34
iwanta34gtr Grand Master

iwanta34gtr

Posted
Posted (edited)

Great thread.

I took a similar approach with my current R34 GTR.

Instead of making her faster I have also been focused more so on making her as close to perfect and original as possible.

Love your work.

Edited by iwanta34gtr
G0Z1LLAAAAA34 Rising Star

G0Z1LLAAAAA34

Posted
Posted (edited)

do you thread crap and post pics of your car in peoples project threads for any particular reason ?

I'm not trying to be a dick or anything, But I don't understand why you get offended by anything that is a little negative. I was there to just express my opinion based on my knowledge in GTRs since this is called a forum? However no 1 is always right so that includes me too so hey prove me wrong if that's the case and I will appreciate it.

In regards to the photo of my car, I just thought I'd post something relative to back up my opinion on engine bay colours. And thanks to the guy for picking on that piece of wood on the battery as I never said my car was "factory spec"... We all love cars and I think it is good to hear both positive and negative comments.

Edited by G0Z1LLAAAAA34
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      R34 GT-T cycling ABS pump

      By Kinkstaah · Posted

      Lets say I wanted to buy this, specifically for this purpose. How do I actually perform the function. Can I still buy a Consult-1? Am I about to be burned by the fact my car is a 2000 model Series 2 R34 and thus will be some stupid other system? Do I just need this -> https://obd2australia.com.au/product/nissan-consult-14-pin-to-usb-ddl-diagnostic-interface-with-ftdi-ft232r-chip/ And with what software?
    • GTSBoy
      33 GTR Broken front wheel knuckle

      By GTSBoy · Posted

      That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • R32 TT
      33 GTR Broken front wheel knuckle

      By R32 TT · Posted

      Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • MBS206
      33 GTR Broken front wheel knuckle

      By MBS206 · Posted

      Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • GTSBoy
      R34 auto to manual conversion help

      By GTSBoy · Posted

      The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
×
×
  • Create New...