Jump to content
SAU Community

Recommended Posts

yehh if i didnt have a misplaced love for 33's i woulda been all over an s13/180 soo good for getting ya slide on and yeh cheap to mod/fix and out of N/A's i dont think any car comes close to comparison .. unless u get a vn on ceptors that'll go sideways but as for controlling it ...well yeh.

Dw sau Vic has always been like this. Us guys in the se suburbs have been making our own to make up for the lack of cruises EVEN when there where people that were officIally appointed roles in sau vics "executive" committee to create these small meets for everyone. What a surprise that they did Jack shit and did not organise anything. Of course myself and a few other sau members volenteered for these positions and because of how secluded the executive committee of sau is of course they wouldn't even consider anyone they don't personally like to actually do the job that they are meant to do. I'm already regretting renewing my membership.

Ey i helped with those meets to and im upper northern re :P

and yeh, part of the reason i didnt renew was the fact most of what i go to are the SE meets

yeah any car with a front swap is generally sus.

i'd buy a ceffy. even in N/A form they're fun with a locked diff. great balance of practicality, moddability and stealth. sucks when it comes to panels though.

hows about get ur licence first then maybe decide on a car?

i want to get somethign and get used to driving it first.

the mercer im driving atm is horrible. handles like a boat, throttle responce is terrible. i have to really put my foot down to make it move, where as the triton is really smooth.

the sil80 was a 400 car run some are legit..most are smashed 180s as s13 fronts were cheaper more common.. but in all honesty mate for what you want to do a N/A r33 wont cut it.. 32 yes or S chassis you'll never look back.

sure 33 is better interior etc but very heavy without a turbo you'lls truglle to get sideways and do a good job of it you'd basically have to leave stockies on anything with more rubber you want go anywhere

the mercer im driving atm is horrible. handles like a boat, throttle responce is terrible. i have to really put my foot down to make it move, < i imagine an N/A 33 would be sameee

gtst hows the sale goin man? ur car is clean as

Man...good thread. I must admit, I've been wanting to go to one of the meetings, but not knowing anyone at all there, I'd kinda feel out of place going. I think SAU does need more meet ups & cruises - be it organised by the SAU comittee or SAU members.

I know other forums do have these more often, but I'm personally more interested in meeting others with Skylines than other cars - and some of the other forums do have bad reps for hoons etc (from what I've read)- so not really interested in meeting up with anyone there if it's going to be attracting unwanted attention.

Anyway, that's my opinion on all of this - everyone obviously has and is entitled to their own.

Hopefully I'll be able to make it tomorrow night, will be good to finally meet some people on here.

the sil80 was a 400 car run some are legit..most are smashed 180s as s13 fronts were cheaper more common.. but in all honesty mate for what you want to do a N/A r33 wont cut it.. 32 yes or S chassis you'll never look back.

sure 33 is better interior etc but very heavy without a turbo you'lls truglle to get sideways and do a good job of it you'd basically have to leave stockies on anything with more rubber you want go anywhere

the mercer im driving atm is horrible. handles like a boat, throttle responce is terrible. i have to really put my foot down to make it move, < i imagine an N/A 33 would be sameee

gtst hows the sale goin man? ur car is clean as

yeh but out of those 400 i dont think 1 hit australias shores

rare as hens tenth to get an original, and they had the sr20det in them im fairly sure

haha not going man, not much interest will renew the rego this week and see how things go

haha cheers, yeh had plenty money chucked into it, and lose it all :P

yeh man thats cars my first 33 droppd a bomb on .. but i bought it when they were $20 odd k stock as arock how times change these new p plate laws killed the market when i bought my 33 mid last year had my choice of hundreds didnt do any leg work just rang around making offers cos they re a dime a dozen they say no bang onto the next one.. sad really thnkfully its a toy car so dont need to sell it

gtr boy the best advice i can give u based on what ur saying

is buy NOTHING you dont know what you want so dont spend your hard earned until your certain dont "Settle" for something

thats a great point.

not really looking at a car to buy just yet. going to wait a bit longer though. maybe around june-ishhh

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...