Jump to content
SAU Community

Recommended Posts

rotas are common in the us.. but yeh sleek is where its at i think that car is perfect if i had an evo it'd look like that

At least but a boot lip or a roof spoiler...

I guess I am just use to seeing EVO's with big ass OEM spoilers which looks tuff as anyway.

evo drivers in oz amuse me. they're either asians who have watched a bit too much initial D, or white boys who are WRC fans. the ironic bit is that both stereotypes are so protective of their precious cars that they won't take it hillclimbing etc and sit there stressing about a chip on the paintwork.

fuck off you sandy vagina'd poser douchebags. your car is not the fucking automotive messiah, it's a fucking lancer with a turbo and an extra LSD. you don't have fucking active yaw control so that you can better negotiate roundabouts. drive it like it was meant to be driven or give it here and walk to your fucking knitting lessons or book clubs or whatever fuck you ballbagless eunuchs seem to like doing for fun.

Sig worthy!

:ninja:

Yeah the can looks tuff as the concave looks quiet aggressive.

I think depending on the offset for the TE37's and the actual diametre size of the wheel you get.

18" and up on TE37's you start to get a bit more concave as well.

I don't mind Rota Grids, only cos I know they're manufactured to specs given to them by a guy I know who tracks on them regularly. He's a structural engineer kent, so he knows his shit.

I tossed up between GTCs and TE37s but like said above TE37s are talked about a lot and used a lot especially on Skylines which is why I went the GTCs both my favourite rims though :ninja:

I dont really like meshies or rims that are to 'busy' like my rims on my NA, they just came with the car meh.

Rotas look ok.. but just was scared about all the stories.

this was the wheel you always wanted for the evo wasn't it?

yeh in 18x9.5 +20

17s look shit, to small

Cuz they are one of the best wheels ever!

:ninja:

Nick get TE37's.

evo3.jpg

rota grids

18x9.5 +20

they're rotas?

yeh

lol the rota's look better imo. more concave

yeh and considering that you pay $1k for a set of 18s from vision R its 4 times cheaper than a set of te37s in the same size/offset and they have better concave still

I don't mind Rota Grids, only cos I know they're manufactured to specs given to them by a guy I know who tracks on them regularly. He's a structural engineer kent, so he knows his shit.

yeah they track them in US hardcore

can even get 17s in them now but only 17x9 +25 or 17x9.5 +30

if i got rotas would need to be at least 18x9.5 +20 cause it just clears the brembos

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...