Jump to content
SAU Community

Recommended Posts

pretty much exactly what my 32 GTR would look like if I bought one...minus the paint on the tires.

Hrm usually im against that kinda stuff as well but that actually isn't all that bad - im quite impressed with it.

It works nicely with the wheel colour and immac bodywork

that's too good looking to be your car. issit?

edit: wait, that smells like a GTR.

tsk tsk Shan losing your edge :)

Should have been able to point out the gtr skirts! They cant fit on gtst's due to the flared rear guards :thumbsup:

The white writing looks pretty neat though.

its a bolt in cusco cage, so it's possible.

also GTR side skirts fits fine on my 32 GTS4, altho I am running GTR fenders and flared rear guards... hmm didn't even think about that.

yeah i dont mind the tyre text

anyone wheel shopping atm should keep an eye out for these:

http://varrstoen.com/blog/

hot shit, predicted.

IMG_6130-500W.jpg

neko-500W.jpg

neko2-500W.jpg

P5151010500W.jpg

84f28805-fa62-4c32-a92f-f882e560781.jpg

4576607845_3835b54ee2_b500W.jpg

they'll ship to oz too :thumbsup: and they make a great CE28N style wheel.

has anyone noticed when you go through school zones where you have to do 40km/h its always the parents with little kids go flying past you when they are the ones that wanted those speed limits, that really pisses me off, i dont have kids but stick to it so why cant they?

cos once their kids are sefely in their SUV's, they don't give a f**k about anyone else.

that is right, its always the ones in their suv's that speed through these zones and tailgate And dont get me started on those people in those bmw x5's :)

has anyone noticed when you go through school zones where you have to do 40km/h its always the parents with little kids go flying past you when they are the ones that wanted those speed limits, that really pisses me off, i dont have kids but stick to it so why cant they?

the parents have to get to the gym and coffee, thats why they drive the big SUV's so when they do hit a kid theres minimal damage to the car.

my super awesome original spec 60gb playstation 3 failed.. yellow light of death.

spend $200 and fix it with a big chance of it failing again or buy a 250gb slim version for 550 or save the coin

hmmmm

Edited by GTR-boy
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...