Jump to content
SAU Community

Recommended Posts

sooo optus wanted my phone for few days and then wanted 150$ for repairing the screen - the place just outside of optus @ westfield doncaster (phone biz) wanted 99$ for a new screen which took 45 minutes..

don't know why i even pay 8$ to optus a month for insurance..

Lol josh got his $10,000 Project Mu 6 piston brakes on CR34M. Cant believe how big they are! They didnt clear the spokes on his VOLK GT-C's 19x10.5 with +12 offset.

Who is this josh you speak of and pics or it didnt happen!!!!! I want Project Mu brake set-up :D

Woo. Finally got the right tie rod for my car. Booked in on Wednesday to get it put on along with a full service and coilover fitment :) So car will soon be LOW..er.

im trying to find tie rods for my car atm :D . tried to get caster rods and all that did was get sent the wrong ones because he thought r34 gtr ones are the same as r32 and r33gtr's and to this day still doesnt believe me.

does that car ever get driven hard enough to require 10k project mu brakes? or is it just cos they look cool?

It was an na before so it had shit brakes, he is building it into a 500rwkw car so got the brakes as an upgrade from n/a ones and to be able to take the power later.

Dunno why he wants 2 fast cars. already has a 430awkw R32 gtr

got my new cluster off a forum member hear cos i was going to replace the rev tacho (mine just sits at 10k and goes spastic)

get it in the mail.. open it... and tacho is already sitting at 10k rpm.. WTF not a happy camper cost me 130 bucks too.. sent the guy a PM.. maybe ill try it on car first see what happens if not.. wtf...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...