Jump to content
SAU Community

Recommended Posts

I think he'd probably like to, but I'm pretty sure he'd cry if he broke that Sard front bar. It's the only one I've seen in aus (other than mine).

That's something I'm not looking forward to... MRZEDX (stock body) can't get in my driveway, so I doubt I'll be able to once I'm lowered and got the kit on.

your hunk of fibreglass is meaningless to most of us, even if you're the only two in oz who were willing to pay money for it.

personally I prefer the factory front bumper with clears and a lip like the C-One, Abflug (with fender flares) or Cruz make over that fibreglass Failside looking monstrosity. The factory styling of an MR2 is actually pretty sweet with the right stance... no need to fux wid it.

Also, my gutter dips before my driveway, converting my 15 degree driveway into instant 45 degree. i just put wood blocks in the gutter when I wanna move my car in and out. if you wanna rock the lifestyle, then you'll make it happen.

The bottom of my driveway isn't the problem, the top is. That, plus the piece of wood that my gates slot in to. That thing is a bitch. My exhaust sometimes hit it at stock height!

i mixed up some concrete with the old man and did some DIY on our driveway (suck it, local council)

doesn't scrape anywhere near as badly, but then who looks on the under side of your front bar? no one.

i mixed up some concrete with the old man and did some DIY on our driveway (suck it, local council)

doesn't scrape anywhere near as badly, but then who looks on the under side of your front bar? no one.

fucken maso's lol :thumbsup:

council f**ked up my driveway nicely...

told the c unts to come fix the shit, so they 'tested it' with their car... one of those ford RTV utes that are jacked up....that cleared so it's within the guidelines apparently.

cocks

council f**ked up my driveway nicely...

told the c unts to come fix the shit, so they 'tested it' with their car... one of those ford RTV utes that are jacked up....that cleared so it's within the guidelines apparently.

cocks

yeah the council were useless with us.. wanted to charge us some absurd figure to redo the whole thing on a more car-friendly angle

yeah the council were useless with us.. wanted to charge us some absurd figure to redo the whole thing on a more car-friendly angle

i'd tell them to suck my cock if they even thought about asking us to pay...pretty sure the driveway was perfectly fine before they came in an f**ked it up the ass to solve the cock head next door neighbours water build up problem....Well done council, the water doesn't pool in front of his driveway anymore...It pools in front of the 2 driveways you f**ked up to fix what wasn't even an issue in the first place

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...